جستجوی کالا ...
دسته بندی ها
کاربر سایت شوید
جستجوی کالا ...
جستجوی کالا ...
وضعیت
:
موجود در انبار اروپا - زمان تحویل 4 تا 6 هفته
برند
:
Schneider Electric
تایپ کالا
:
SH31003P12F2100
کد سازنده
:
SH31003P12F2100
کد EAN
:
3606485297163
ویژگیها
Load cycle
other
Design
other
With positive temperature coefficient resistance (PTC)
No
Tipp ratio
0
Vacuum pressure impregnation (CPI)
other
Measurement voltage
115 V
قیمت
:
استعلام
حداقل قابل خرید
:
1 عدد
قابل پرداخت
:
استعلام
مشاهده جزییات فنی کالا :
AC-Servo, SH3, 100 mm, 8.0 nm, pass spring IP65 / IP65, multiturn 128 P / U, 2x M23, brake
Lexium SH3 servo engine. This SH3 series of AC servo motors has a low rotor performance moment, which allows a high acceleration for dynamic application. Thanks to the winding technology, a higher power density in compact design results. This servo has a nominal permanent level of 8,0 Nm and reaches a peak torque of 28,3 Nm. Its nominal speed is up to 4800 rpm depending on the supply voltage. A voltage-dependent nominal power of up to 2560 W. The built-in encoder is performed as a multiturn with 128 periods / turn (128x1024x4096) as a SinCos Hiperface. The electrical connection is made via connectors 2x M23, angled by 90 ° and rotatable. For mounting the engine flange is 100 mm. The drive shaft has a diameter of 19 mm. The end of the wave is with a pass spring and corresponds to the protection type IP65. The engine housing corresponds to the protection type IP65. A brake is integrated. For the operation of the synchronous motor the servo amplifiers of the Lexium series Lexium 52 & amp, Lexium 62 are recommended.
شما هم می توانید دیدگاه خود را درباره این کالا ثبت کنید.
دیدگاه خود را ثبت کنید
SH31003P12F2100, AC-Servo, SH3, 100 mm, 8.0 nm, pass spring IP65 / IP65, multiturn 128 P / U, 2x M23, brake
قیمت
:
استعلام
حداقل قابل خرید
:
1 عدد
قابل پرداخت
:
استعلام
