ER-AP 60 H, cleaning fan ER-AP 60 H 61 m3 / h, moisture control, basic load

Upholding fan ER-AP 60 H 61 m3 / h, moisture control, basic load

Design with moisture control and basic load control: barrier-free product, as automatic on / off is possible via moisture control. Fully automatic intelligent moisture control. No adjustment of the on-turn humidity is necessary. The fan monitors the air humidity independently and automatically. Non-speed control. Not suitable for second room ventilation. Manual operation possible via a switch, e.g. switching on the full load by light switch. Standard switch: fan runs in base load operation, moisture control is active, when the on-turn point is exceeded full load operation, when the off-turn point is below base load operation. Other circuit variants: fan operation with or without basic load operation, manual connection of the full load, on or off Turn off the fan by a switch. Switching the full load through the light switch and a follow-up control (after-time 15 min) of the fan. The fan runs until the humidity in the room has fallen under the deactivation humidity. After 60 min at the latest, the afterlife is activated and the fan is switched off. Fastening fan with ISO Coarse 30% (G2) filter for ventilation of house kitchens, bathrooms or WCs. Plastic flare DN 75 / 80 with automatic plastic impact valve. Plastic impact valve is also used as a calvary valve. The housing can be rotated, thus connecting the outlet to the left top or right top of the main line. Easy filter change without tools. Easy and fast installation of the fan in the housing via the snap-fastening and the electrical connection. Colour white like RAL 9016. All MAICO ER devices correspond to the protection type IP X5 and can therefore be installed in the range 1 according to DIN VDE 0100-701, even in the case of jet water. For details see planning instructions. Protection class II. The extremely steep characteristic shows the high pressure capacity of the ER fans. Robust energy-saving capacitor engine. Motor with thermal overload protection. Maintenance-free, with both sides closed ball bearings. Volume flow line and leakage rate tested by TÜV Bayern e.V. Leckair flow < 0.01 m3 / h Shaft level difference according to DIN 52210 -6, tested by the IAB Oberursel. With VDE- sign. General construction inspection approval, approval No: Z-51.1-42. Admission notice on request or on our homepage www.maico-ventilator.com.Article: ER-AP 60 H, version: moisture control, flow volume: 35 m3 / h / 61 m3 / h, speed: 900 1 / min / 1250 1 / min, air direction: ventilation, speed control: no, SEC average: -20.23 kWh / (m2 * a), speed: 2230 V, power supply: 11 W / 21 W, height: 0.13 A, speed control: 535 mm, size: 535 mm (size: 535 mm), size: 535 mm (size: 535 mm), size: 535 mm (size: 535 mm), size: 535 mm, size: 535 mm, size: 5mm, size: 540 mm (size: 540 mm), size: 540 mm), size: 5mm (size: 5mm), size: 540 mm (size: 5mm), size: 540 mm, size: 5mm (size: 5mm), size: 5mm, size: 5mm, size: 5mm, size: 5mm: 5mm, size: 5mm