WS 10 KS, Comb sensor

Comb sensor

The Kombi sensor records the weather data such as wind speed, precipitation and brightness for the directions of the east, south and west. It is suitable for outdoor mounting on the mast or on the wall. The data is transmitted to the weather station via a 4-wire line. The parametrization and the analysis of the data itself is carried out in the weather station. The operational safety of the wind and rain sensor is of particular importance and is therefore monitored cyclic. The heating of the combi sensor protects the electronics from dusk and condensation in the specified temperature range. It does not protect against ice-forming of the housing or moving parts. The 10 m long connection cable (6-adrig) is directly connected to the device to protect from the incoming moisture. The combi sensor requires the power supply of type no.: WSSV 10. Supply of sensor unit (including heating): AC 24 V ~ ± 15%, 50 / 60 Hz Max. Current consumption: 600 mAConnection cable: LiYCY, 6 x 0.25 mm2, shielded length: 10 m, max. 50 mAmbient conditions Ambient temperature: -40... + 60 ° C (ice-free) storage / transport temperature:? 40... + 60 ° C Moisture: building-outside housing Protection level: IP55 protection class: III dimensions (Ø x H): 130 x approx. 200 mm (without niro- holding bar) Assembly: niro- holding bar on mast or wall weight: approx. 330 g (without niro- holding support) sensor signals: Wind sensor measurement range: approx. 1... 40 m / s accuracy:? 0.5 m / s,? 20... + 60 ° CRain sensor measurement range: precipitation yes / no sensitivity: fine drizzle on-turn delay: approx. 3 precipitation particles off-turn delay: approx. 2 min brightness sensor measurement range: approx. 1... 110 klx spectral range: approx. 700... 1050 nm direction of the sky: east, south, west-dampening sensor measurement range: approx. 0..