102300, range / line coupler line amplifier KNX REG

Area / line coupler line amplifier KNX REG

KNX range line coupler or Line amplifier REG plus features: The range line coupler interconnects two KNX lines and ensures a galvanic separation between these lines. This allows each bus line of a KNX installation to be operated electrically independently of the other lines. Support of KNX Data Secure Communication (KNX Data Secure Telegrams can be processed and filtered, forwarded or blocked according to the settings). Fast communication between KNX products in main line and line (long frame support from ETS5). Area - line coupler: Use as range or line coupler depending on the physical address and parametrization. Reduction of the bus load through filter function (filter table). Parameable transmission of group telegrams. Repetitive rate for transmission errors. Telegram confirmation parametable. Support of the fully extended group address range from 0 to 31 with the functions lock, unfiltered forward and filter in both communication directions between the main and the subline. Redirect and block function unfiltered even for physically addressed telegrams between main and subline in both communication directions (programming and sabotage protection). Replay function: yes no for transmission errors on the main or The subline for the telegram type broadcast can be adjusted separately. Telegram confirmation on the main Subline with the settings always and only when forwarding separately for group telegrams and physically addressed telegrams possible. For physically addressed telegrams, the setting can always be selected from NACK (emergency acknowledge) (program protection with feedback). Line amplifier: As a line amplifier, the extension of lines to max. four line segments (max. three parallel line amplifiers per line) with up to 64 participants is possible. Repetitive rate for transmission errors. Note: For each line (line, main line, line) or line segment a separate power supply is required.