Fud61NP-230V, radio actor universal dimming switch without N

Radio actor universal dimming switch without N

Without N- connection, power MOSFET up to 300W. Stand-by loss only 0.7 watts. Minimum brightness and dimming speed adjustable. With children's room and slumber. Luminous learning. Encrypted radio, bidirectional radio and repeater function can be switched on. For installation. 45mm long, 45mm wide, 33mm deep. Universal dimming switch for R, L and C loads up to 300W, depending on the ventilation conditions. Automatic detection of the load R + L or R + C. Without N- connection, therefore suitable for mounting directly behind the light button, even if there is no N- line. For 230V LED lamps and energy-saving lamps ESL not suitable, please use the dimmer Fud61NPN with N- connection. Supply, switching and control voltage local 230V. Minimum load only 40W. Zero-pass circuit with soft-on and soft-off for lamp protection. The set brightness level remains stored when switching off (memory). In the case of a power failure, the switching position is stored and, if necessary, when the supply voltage is returned. Automatic electronic overload protection and overtemperature shutdown. With the% lamp switch, the minimum brightness (fully dimmed) can be set. In the position LRN up to 35 radio planets are assigned, one or more central control buttons. The dimspeed switch can be used to set the dimm speed. At the same time, the duration of soft-on and soft-off is changed. In addition to the radio control input via an internal antenna, this universal dimming switch can also be controlled locally with a conventional 230V control button that may be installed before. Encrypted sensors can be learned. It can be switched on bidirectional radio and / or a repeater function. Each state change as well as received central control telegrams are then confirmed with a radio telegram. This radio telegram can be learned into other actuators such as FSR61NP-230V, controllers and in universal displays. The current dimming value in% is also displayed in the respective app. The radio windows can be learned either as a direction button or as a universal button: As a direction button, turn on and dim on one side and turn off and dim on the other side. Double-click on the on-turn side triggers automatic dimming up to full brightness at dim speed. A double click on the switch-off side triggers the slumber. The children's room is installed on the on-board side. As a universal key, the direction is reversed by short release of the button. Short control commands turn on / off. Light-level control, children's room control and slumber control according to the instructions. The LED accompanies the learning process according to the operating instructions and displays radio control commands in operation by a short flash.