FSR61 / 8-24V UC, radio actor current-shock control relays, 8-24V UC, 1 close 10A

Radio-actuator power-shock-control relays, 8-24V UC, 1 close 10A

1 closed potential-free 10A / 250V AC, 230V LED lamps up to 400W, light bulbs 2000 Watt. Reverse delay with switch-off warning and button-long light can be switched on. Encrypted radio, bidirectional radio and repeater function can be switched on. Stand-by loss only 0.3-0.8 watts. For installation. 45mm long, 45mm wide, 33mm deep. Supply and control voltage local 8 to 24V UC. In the event of a failure of the supply voltage, the switching state is maintained. In the case of a recurring supply voltage, it is defined to be off. After installation, wait for the automatic short synchronization before the switched consumer is placed on the net. In addition to the radio control input via an internal antenna, this radio actor can also be controlled locally with a conventional control button that may be installed before. A mica flow is not permitted. Encrypted sensors can be learned. It can be switched on bidirectional radio and / or a repeater function. Each state change as well as received central control telegrams are then confirmed with a radio telegram. This radio telegram can be learned into other actuators such as FSR61NP-230V, controllers and in universal displays. Scene control: With one of the four control signals of a double-tailed button, several FSR61 can be switched on or off to one scene. With the upper turn switch, in the position LRN up to 35 radio planets are assigned, one or more central control buttons. In addition, radio window door contacts with the function of closing or opening with open window, radio external brightness sensors FAH and radio motion detector FBH. The desired function of this current-shock control relais is then chosen: ER = control relais. ESV = power shock switch. If applicable, with return delay, then + button-long light = ESV with button-long light, + switch-off warning = ESV with switch-off warning, + button-long light and switch-off warning = ESV with button-long light and off warning. In the case of the switch-on headlight, keys can be set to permanent light for more than 1 second, which is automatically switched off after 2 hours or can be switched off by buttons. With the switch-off warning the lighting flashes approx. 30 seconds before the time run and a total of 3 times at shorter intervals. If the switch-off warning and the switch-off light are switched on, the switch-off warning shall be carried out after the automatic switch-off of the continuous light. With the lower turn switch the return delay of 2 to 120 minutes can be set in the ESV function. In the position of infinitely normal current shock switch function ES without a return delay, without a button-long light and without a switch-off warning. In the position ER = switch relais of the other switch, this second switch, in the settings, has an infinitely security and power-saving function: If the switch-off command is not recognized, for example because of a clamping or too fast-acting button, the relay automatically switches off after the time adjustable between 2 and 120 seconds. If an FTK is learned, this time function is switched off. Density switch with radio-external-brightness sensor FAH and motion detection with radio-motion detector FBH in accordance with the instructions for use. The LED accompanies the learning process according to the operating instructions and displays radio control commands in operation by a short flash.