FSR70S -230V-rw, current-shock control relays as a rail switch in white, 1 close 10A

Current-shock control relays as a short switch in white, 1 close 10A

1 not potential-free 10A / 250V AC, 230V LED lamps up to 400W, light bulbs 2000 Watt, ESL up to 200W. Stand-by loss only 0.8 watts. Assembly in the 230V power line of standing and night table lamps. 100mm long, 50mm wide and 31mm high. This radio actor as a power-shock control relais has the most modern hybrid technology we have developed: We have combined the wear-free reception and evaluation electronics with a bistabile relay that switches through zero. As a result, there is no coil loss and no heating. With the turn switch on the side, the positions LRN are assigned to up to 35 radio planets, one or more central control buttons. In addition, a radio motion brightness sensor FBH and / or a radio external brightness sensor FAH for a presence simulation. The desired function of this current-shock control relais is then chosen: ES = current-shock switch. With the FBH, the FBH is switched on when moving, with the additional FAH at dusk. If no movement is detected, the contact will open for 4 minutes. A radio aster may be used for activation or In addition, deactivation of a presence simulation will be learned. ER = control relays. When the FAH is on at dusk, the contact opens for 4 minutes. AS = presence simulation. The AS starts with a random break time between 20 and 40 minutes, which follows a random turn-on time between 30 and 120 minutes. If the switch is turned to AS or the power supply is switched on in position AS, the light switches on after 1 second for 5 seconds. The AS only starts from the beginning of the dusk with a trained FAH. After the FAH has recognized brightness, the AS ends after 4 minutes. The LED on the side accompanies the learning process according to the operating instructions and displays radio control commands in operation by a short flash.