FT4F-ws, radio-set-key white, battery-free and unconductive, with surface and double-face

Radio-set-button white, battery-free and inline, with surface-top and double-face

Surface radio-aster, 80x80mm outside, frame-inside dimensions 63x63mm, 15mm high. Creates the energy for radio telegrams even at key pressure, therefore without connection line and no stand-by loss. With a face and a double. Smart Home Sensor. The scope of delivery includes the frame R1F, a surface-top WF, a double-top DWF (all the same color), a mounting frame BRF, the holding plate HP, the radio module and a adhesive film. Funktaster with a tilt can send two evaluable signals: press the top of the tilt and press the bottom of the tilt. Funktaster with double-face can send four evaluable signals: press two heads at the top and at the bottom. The support plate can be screwed to a flat surface or glued to the wall, glass or furniture with the attached adhesive foil. The sleeves in the can are used for screw fixing via a 55mm switch box. From the factory, the double-face has been mounted on the radio module. If this is to be replaced against the large sieve, then pull the sieve halves forward and do not bend to the middle. After that, the large sieve is so fast that its markings 0 and I on the back match the radio module. When gluing, first attach the set of support plate with frame and mounting frame - with the top and bottom ramps. Then the set of radio module with a sieve - marking 0 on the back always at the top - fasten. Before screwing, remove the frame from the support plate with the mounting frame. To do this, press the support plate to the outside. Then screw the support plate - with the top and bottom ramps - and the frame with the mounting frame, and the set of radio module with a tilt - marking 0 on the back always at the top. For screw fastening we recommend stainless steel steering screws 2,9x25mm, DIN 7982 C. Both with dowels 5x25mm and on 55mm switch cans. The eltako frame can be replaced at any time during assembly against a frame with the inside size 63x63mm of other manufacturers. The radio module contained in the radio monitor can be learned in an encrypted manner according to the operating instructions in all the encrypted actuators of the series 61 and 71, as well as in the FAM14. For this purpose, the FTVW radio-key encryption pipe from page 7-21 is required. Encrypable actuators carry the key pictogram.