S2U12DDX-UC, digital adjustable 2-channel switch, 1 + 1 closing 16A

Digital adjustable 2-channel control clock, 1 + 1 closing 16A

2-channel control. 1 + 1 Close potential free 16A / 250V AC. 230V LED lamps up to 600W, light bulbs 2000W. With Astrofunction. Stand-by loss only 0,03-0,4 Watt. With display lighting. Line installation device for assembly on DIN-EN 60715 TH35. 1 unit of division = 18mm wide, 58mm deep. With the patented ELTAKO- Duplex technology (DX), the normally potential-free contacts can still switch 50Hz in the zero pass when switching 230? V AC voltage and thus drastically reduce wear. To do this, simply connect the N- conductor to the terminal (N) and L to 1? (L) and / or 3 (L). This results in an additional standby loss of only 0.1 watts. Due to the use of bistabiler relays, there is no coil loss and no heating. Up to 60 control tube storage places are freely distributed on the channels. With date and automatic summer time / winter time conversion. Power reserve without battery approx. 7 days. Each storage space can be equipped with either the Astrofunction (automatic switching after sunrise or sunset), the turn-on and off time or an impulse switching time (where an impulse of 2 seconds is triggered). The on / off time Astro can be moved by ± 2 hours. In addition, a time shift of up to ± 2 hours, influenced by the solenoids, can be entered. With control input (+ A1) for central control ON or off with priority. Supply and control voltage for central control 12.. 230V UC. The switch clock is set with the keys MODE and SET and a key lock is possible. The display lighting is switched on by pressing MODE or SET. 20 seconds after the last MODE- or The program automatically returns to the normal display and the display light is switched off. Set language: After each setting of the supply voltage, the language can be selected and confirmed with SET within 10 seconds. D = German, GB = English, F = French, IT = Italian and ES = Spanish. The normal display will then appear: day, time, day and month. Quick run: In the following settings, the numbers run up quickly when the input key is pressed longer. Let go and press again longer changes the direction. Time set: Press MODE and then search for the UHR function with the PRG (program) and select with MODE. At S with SET, select the hour and confirm with MODE. Just as with M. Set date: Press MODE and then search for the DAT function with PRG with SET and select with MODE. At J with SET select the year and confirm with MODE. As with M as month and T as day. As the last setting in the order, MO (day of the week) blinks. This can be set with SET and confirmed with MODE. Set location (if required): A list of German cities can be found at the end of the user manual. Press MODE and then search for the POS function with PRG with SET and select with MODE. For BRT with SET, select the latitude and confirm with MODE. Also at LAE, select the longitude and press MODE. Now with GMT with SET select the time zone and confirm with MODE. If desired, WSW (winter solstice) and SSW (summer solstice) can now enter a time shift of up to ± 2 hours for both channels. Hand on or off with priority: Press MODE and then search for the INT function with PRG with SET and select with MODE. For KNL with SET, select channel 1 or 2 and confirm with MODE. Now you can switch between AUT (automatic), ON or OFF with SET. After confirmation with MODE, the switching position of the selected channel may change. If the switching state is to change automatically again when a time program becomes active, then the AUT (automatic) must be selected again. If MODE is pressed for more than 2 seconds in one of the confirmations, the change is saved and the normal display appears. Summer / Winter time conversion: Press MODE and then search for the SWZ function with PRG with SET and select with MODE. Now SET can be changed between ON and OFF and confirmed with MODE. If ONE has been selected, the switch-over is automatic. Central control ON or off with priority in automatic operation (AUT): Press MODE and then search for the ZEA function with PRG (program) and select with MODE. Now SET can be changed between ZE and ZA and confirmed with MODE. Turn on / off random mode: Press MODE and then search for the ZUF function with PRG with SET and select with MODE. Set with SET to A (ZUF +) or OFF (ZUF) and confirm with MODE. In case of random mode, all switching time points of all channels are randomly moved by up to 15 minutes. Switch-on times to earlier and off times to later. Enter control tube programs: according to the operating instructions. Switch on the key lock: Press MODE and SET together and lock with SET at LCK. This is displayed by an arrow next to the lock symbol. Turn off the key lock: Press MODE and SET - 2 seconds together and unlock with SET at UNL.