FASM60-UC, external transmission module 2 channels

External transmission module 2 channels

Radio external transmission module 2 channels. LxBxH: 60x46x30mm (dimensions without screw). With an inside antenna. No stand-by loss. The FASM60-UC radio transmission module has two channels and can send radio-telegrams to the ELTAKO building radio like a radio-aster. A1 causes a radio telegram like the top of the top to press a radio adapter with a top and A3 like the bottom of the top. The telegram when opening the two control contacts is the same as the one from Funktaster. No multiple radio transmission modules shall be controlled at the same time. For the IP54 waterproof connection there is a M12 screw on the bottom. Connection to an inside 5-fold terminal for the control inputs + A1 / -A2 and + A3 / -A2. For this purpose, remove the two screws on the front and remove the lid. If the terminals A1 and A3 are connected to a bridge, a radio program of A3 is sent 1x per minute as long as the control voltage is present. For example, for central commands with priority. The universal control voltage processes control commands from 8 to 253V AC or 10 to 230V DC with a length of at least 0.2 seconds. The maximum parallel capacity of the single control lines (separately laid) is at 230V 3nF, this corresponds to about 10 meters. Parallel control lines (jointly laid) at 230V 0.5nF, approx. 2 meters. The maximum parallel capacity of the control lines is 12 to 24V UC 0.03µF, this corresponds to approx. 100 meters. No constant power supply required, therefore no stand-by loss. The radio programs can be encrypted. The internal turning switch is used for the activation or Deactivation of the encryption required and is in operation in middle position. Enable Encryption: Turn the turn switch to the right and click once. Disable encryption: Turn the switch to the left and click once.