PR430170, sensor laser, reflex, 15x32x43mm, laser diode, sensor laser, reflex, 15x32x43mm, laser diode,

Sensor laser, reflex, 15x32x43mm, laser diode, sensor laser, reflex, 15x32x43mm, laser diode,

The reflex barrier has a sensitivity setting by teach-in. This is possible both directly on the sensor and via the remote-teach input. The distance adjustment of the button devices is done via a mechanical adjustment unit. The protection type IP67 remains guaranteed and objects are reliably detected regardless of their colour. The function principle of this button is based on the triangulation process in which the object position is determined from the angle of the light reflected by the object. For all triangulation sensors, care must be taken to ensure that the laser point can be seen directly from the receiver look and that there are no obstacles to this look. Due to the special design of the optics of the reflective barriers, the transmission and receiving beam are on a common axis. This coaxial light beam, for example, allows a object capture through a small opening, even if it is located directly in front of the sensor. The yellow LED display lights up when the output is safely switched. When the yellow LED blinks when the output is switched on, the devices work without sufficient function reserve. This is the case, for example, when the sensors are polluted or deadjusted. The green LED lights up after setting the operating voltage. With the small, red laser point, the sensors can always be easily and reliably aligned. Application examples Detection of object edges with high accuracy control of parts of any form and color without contact position detection impulse for counting devices detection of smallest objects