MOD12D-UC, digital adjustable engine dimmer, power MOSFET up to 300W

Digital adjustable engine dimmer, power MOSFET up to 300W

Power MOSFET to 300W. Stand-by loss only 0.3 watts. Minimum speed, maximum speed and dimming speed can be adjusted. Line installation device for assembly on DIN-EN 60715 TH35. 1 unit of division = 18mm wide, 58mm deep. Engine dimmer with phase cut for L-loads up to 300 Watt, depending on the ventilation conditions. Only 1 fan engine may be connected. Universal control voltage local 12.. 230V UC and additional universal voltage control inputs 8.. 230V UC central and central from. The control inputs are galvanically separated from the supply and switching voltage 230V. Zero-pass circuit and turn on with increased speed. In the case of a power failure, the switching position and speed level are stored and, if necessary, will be switched on when the supply voltage is returned. Automatic electronic overload protection and overtemperature shutdown. 6 functions and times are entered according to the operating instructions with the keys MODE and SET and displayed on the LC display. A language selection and a keypad are possible. The total turn-on time is added and displayed on the display in the lowest line. It can be reset to 0. The top line shows the respective parameters when setting and the active function in operation. The left arrow shows the switch position 'One' and the right arrow if necessary the locking. In the middle line, when setting the setting parameters, the speed between 10 and 99 is shown and the remaining time in minutes for the MOD and RTD functions. MOD = engine dimmer with adjustment of DSP, minimum speed MI%, maximum speed MA%, memory function MEM + as well as selection of central control inputs on and / or from active or non-active. Short control commands turn on / off, permanent control changes the speed. An interruption of the control changes the direction of dimming. RTD = engine dimmer with two direction keys for the direction of the dimming. DSP, MI% minimum speed, MA% maximum speed and MEM + memory function. In case of control over + E1, a short control command switches on, permanent control dimms up to maximum speed. A double click immediately dims to the maximum speed. In the case of control over + F1, a short control command turns off, permanent control dims up to the minimum speed. No central control function. ESV = engine dimmer like the MOD function with manually on / off. In addition, a drop-back time TIM can be set from 1 to 99 minutes at the end of which is switched off. Central One has priority over Central One. NLZ = engine dimmer with the function of reflow switch with adjustable speed DZ%, response delay AV from 1 to 99 minutes and return delay RV from 1 to 99 minutes. When the control voltage is set, the AC time is switched on. When the control voltage is removed, the RV time begins, at the end of which is switched off. No central control function. ON = Duration One with maximum speed, OFF = Duration Off. The key lock is activated by pressing MODE and SET at the same time and then confirming the flashing LCK with SET. Deactivate by simultaneously pressing MODE and SET 2 seconds and then pressing the flashing UNL with SET.