MW100100, path sensor, magnetic table, 37x25x10mm, relative, 100µm, path sensor, magnetic table, 37x25x10mm, relative, 100µm,

Path sensor, magnetic table, 37x25x10mm, relative, 100µm, path sensor, magnetic table, 37x25x10mm, relative, 100µm,

The incremental sensor is a linear or angular (rotating), the distance and direction of the path, or It is also possible to detect angle change and direction of rotation. The path measurement system consists of two parts: the button and the magnetic tape. On the 10mm (20mm) wide magnetic band, the north and south poles change in a longitudinal direction with exactly defined pole width. The magnetic tape is protected by a back-side support belt and by a magnetic, transparent stainless steel cover. An additional double-sided adhesive tape is used for mounting. The head of the button mounted over the magnetic tape questions the different poles. The built-in electronics form rectangle impulses from the generated sinus-shaped signal. These can be processed directly via a counter or a control. The sensor element has a width of 5mm and is located in the middle of the button head. An aluminium protection profile (AM000050) can be screwed over the magnetic tape (AM000085) in environments with dust, chips, moisture or mechanical effects. The profile rail (AM000117) is available for the 20mm wide magnetic band (AM000109). The maximum length is 80m. The accuracy of the system is in metres ± (1 + 0.03 x L) mm taking into account the magnetic band length "L." The magnetic tape shall be 100mm longer than the required measuring distance, 50mm shall be added on each side. For higher requirements, please use MW11 (resolution 10μm, accuracy 50μm) with magnetic tape (AM000059)! For example, road measurements under the most difficult environmental conditions