707050 / 8-06 / 000 0.. 100 ° C Pt100dl, two-wire transmitter, connection head form B, screw clamps, 0.. 100 ° C Pt100dl

Two-wire transmitter, connection head form B, screw clamps, 0.. 100 ° C Pt100dl

The measuring converters capture sensor signals of resistance thermometers, thermocouples, resistance potentials / WFG or resistance / Potis. When using a resistance / potis or resistance thermometer, the input-side sensor connection can be in two, three or four-wire connection. Voltage signals in the range of -100... + 1100 mV can also be recorded. Depending on the choice of the measurement input, the linearization variants are available linear, temperature linear and the possibility of a comfortably configurable customer-specific linearization. The output signal is 4... 20 mA. The input and the output signal are galvanically separated from each other. For both types a reversion of the output signal is possible. The configuration of the transmitter with regard to the sensor type, connection technology of the sensor, measuring range (freely adjustable) and linearization is done with the help of a setup program on the PC. The connection to the PC is made via an USB interface, which does not require any additional auxiliary voltage. The minimum / max. process value, the minimum / max, is recorded by the transmitter via the USB interface. -Operating temperature is read out and the sensor wiring is checked online. The operating state of the measuring form is signaled by a two-colour control LED (red / green). This light is green in non-interference-free operation. If an error occurs, such as a sensor break, this will be displayed with a flashing code.