603070 / 0002-7-028-000-25-2000-40-10-6-40-00-0 / 707, temperature guard, 0 to 200 ° C, transmission 2000 mm, hat rail

Temperature guard, 0 to 200 ° C, transmission line 2000 mm, hat rail

Due to its innovative housing made of high-quality plastic, the 1-pole mechanical construction thermostat is suitable for mounting on a TH35 DIN EN 60715 hat rail or directly for wall mounting. The measuring system used is based on the fluid expansion principle and can be used without any problems up to a maximum permissible sensor temperature of 230 ° C. The smooth copper round sensor has a diameter of 6 mm with a sensor length of about 78 mm. The thermostatic transmission is also made of copper. With respect to a 5 mm bending radius, the transmission line can be moved flexibly. The maximum permissible ambient temperature on the housing (protection type IP20) is 55 ° C. With the help of a screwdriver, the desired shutdown temperature can be easily set on a scale. The set off temperature can be read at any time. The temperature guard with switching contact is characterized by a high switching point accuracy of + / -3% in the upper scale. The built-in temperature compensation reduces ambient temperature influences at the head of the switch to a minimum. A key advantage is that no additional auxiliary energy is required for temperature measurement. The electrical connection is made by PushIn © terminals, which significantly reduces the installation time compared to conventional screw connections. The maximum permissible switching power is AC 230 Volt / 16 A. The thermostat has a switching difference (hysteresis) of about 5 K and automatically switches back to the state of origin by this value after the switch-off temperature is below. The temperature guard is very flexible and can be used for temperature monitoring in laboratory and climate conditions as well as in heating, air conditioning and ventilation. Other applications include the plastics industry, equipment and mechanical engineering, furnace construction and building automation. The device is approved in accordance with DIN EN 14597 and has an EAC approval.