JFM-0810-05, plain bearing with waistband

Slide bearing with a waistband

iglidur ® J The versatile continuous runner More than 250 dimensions from the bearing Low wear with many wave materials Low friction values in the dry-running vibration damping Good chemical resistance Best material when using soft wave low moisture absorption The iglidur ® J slide bearing with a band is characterized mainly by the lowest friction values in the dry run and its very low nitrogen-slip inclination. With a maximum recommended surface pressure of 35 MPa, iglidur ® J- gliding bearings are not suitable for extreme loads. Typical application areas [Link id = 30] [Link id = 25] [Link id = 31] [Link id = 32] [Link id = 33] Here you will find further applications: [Link id = 9] When I take it? If the maximum wear strength is sought at low to medium pressure loads [Link id = 25] [Link id = 31] [Link id = 33] If the low friction values in the dry state are desired for high pressure levels [Link = 108] If the pressure levels are not required to be higher [Link 108]. The moisture absorption and the heat expansion are crucial for the material. Low-moisture plain bearings can be installed with a small bearing game. For the wall thickness: The thicker the bearings are, the bigger the game of the bearings must be. [Link id = 2] Assembly glidur ® sliding bearings are push-in boxes. The inner diameter is only set after pressing into the recording hole with the appropriate tolerance. The excess pressure can be up to 2% of the inner diameter. This ensures the safe press seat of the bearings. Axial or radial shifts in the housing are thus safely avoided. [Link id = 6]