MTN5510-1119, ARGUS presence master with IR, relay 1-fold, polar white

ARGUS presence master with IR, relay 1-fold, polar white

Presence detectors for the ceiling mounting in the interior. The sensor module captures moving heat sources (e.g. persons) in an adjustable coverage range and starts a stairlight time for ohm, inductive and capacitive loads such as filament lamps, energy-saving lamps, NV halogen lighting with conventional transformer, electronic transformer, fluorescent lamps The sensor module has a light sensor with adjustable brightness threshold, so that the lighting is only switched on below a certain brightness threshold. The presence function allows the sensor module to turn off the lighting despite a present person, if there is enough natural light available for installation in a 60-hole box or in the mounting housing available as an accessory. With claw and screw fastening. With screw clamps. Functions: -switching from an output external control via a PLinput (sensor module to central station use (slave), substation Plus). Switch. Light-related stairwell function. Nominal voltage: AC 220 / 230 V, 50 / 60 Hz. Nominal current: max. 10 AX, cos Phi 0.6 outputs: 1x closing. Max. switching power per channel: filament lamps: 2200 W. HV halogen lamps: 2000 W. NV halogen lamps with wrapped trafo: 500 VA Electronic trafos: 1050 W. Capacitive load: 10 A, 140 UF. Energy-saving lamps: 100 VA. Engine load: 1000 VA. Neutral conductor: required (3 conductor system). Cross-section: max. 2x2.5 mm ². Coverage angle: 360 degrees Number of planes: 6. Number of zones: 136. Number of motion sensors: 4. Recommended mounting height: 2,5 m. Range: radius of max. 7 m (at a mounting height of 2.50 m). Sensitivity infinitely adjustable brightness threshold: infinitely adjustable from approx. 10 to approx. 1000 lux. Afterlife: Channel 1, infinitely adjustable from approx. 10 s to approx. 30 min. Color polar white