D 452 FU-EBI O.T., EnOcean Easyclick per receiver, underplaster, 2 channel

EnOcean Easyclick per receiver, underplaster, 2 channel

The bidirectional Easyclick receiver not only receives the radio signals, but returns its status with each state change. For example, real switching states AN / OFF can be visualized on the hand transmitter D 450 FU-HS 128. The Easyclick receiver is used to switch lighting and other electrical consumers. Different functions and parameters can be selected: - second-door (default ON / OFF) - one-button (switch ON / OFF) - key (impulse) - hotel-card switch with selectable afterlife - step-house light with selectable running time and a switch-off warning - automatically off after the selected running time - fan function with delayed ON and with selectable follow-up time - save and retrieve 4 light-scenes (each one light-scene) - access and window-contact, and parallel to the light-sensor - for each light-sensor - and-signal switch-off. 32 channels can be individually set up. The channels can be programmed independently of each other. - Independent of the set functions, integrated repeater functions (1-level / 2-level) can be switched on depending on the project. - When learning, for example, window contacts, window grips and motion detectors, these are already assigned to the corresponding function / parameter. Technical data: own-consumption: & lt, 0.5 W (bistabile relays) transmission frequency: 868.3 MHz power supply: 100-240 V ~ / 50-60 Hz neutral conductor: required ambient temperature: -20 ° C to + 40 ° C storage temperature: -40 ° C to + 85 ° C plug terminals: max. 1 x 1.5 mm ² housing height: 28 mm protection type: IP 20 mounting pockets: for screw mounting in switch-cans, applications: CE, KEMA / KEUR charging 230 V ~ (110 V ~) filament lamps 500 W (250 W) HV halogen lamps 100 W (50 W) engine load 100 VA (50 VA) EVG load 1 piece (1 piece) The number depends on the type and the manufacturer. The data sheet of the device must be taken into account!