D 451 FU-BM, EnOcean Easyclick per wall motion detector

EnOcean Easyclick per wall motion detector

The wireless Easyclick wall motion detector gains its energy through solar cells and detects motion through a passive infrared sensor. The motion detector is easy to install and saves energy. For example, when a person enters a room, the lighting automatically turns on and when leaving with a subsequent time off automatically. The motion detector sends radio signals to the parametable Easyclick-Pro receivers or all EnOcean interfaces for the building system technology. With a brightness of & lt, 50 Lux, a battery operation (CR2032) is possible. Technical data: Transmission frequency: EnOcean 868.3 MHz Recording range: approx. 12 m Ø Mounting height: 2-3 m Transmission range: approx. 25 m Minimum brightness: 50 Lux for Automatic AN / OFF energy generator: Solar cell, internal gold cap charging time: Learning = 4 minutes at 100 Lux approx. 1.5 min at 200 lux movement = approx. 6 min at 100 lux approx. 3.5 minutes at 200 Luxfor test mode = approx. 5.5 hours at 200 lux full charging time: 9 hours at 200 lux charging times for operation: 3 hours a day at 200 lux operating time in the dark: approx. 48 hours. Battery operation: approx. 1 year depending on the frequency of the transmission: immediately on motion detection... variable every 60 seconds at 300 lux. At 50 lux operating time in the dark: approx. 48 hours. Battery operation: approx. 1 year in relation to the frequency of the Sendin interval: approx. 5 hours. A separate light sensor can be installed for daily light control.