D 451 FU-EBI UP O.A., EnOcean Easyclick per receiver, with support plate, 1 channel

EnOcean Easyclick per receiver, with support plate, 1 channel

The bidirectional Easyclick receiver not only receives the radio signals, but returns its status with each state change. For example, real switching states AN / OFF can be visualized on the hand transmitter D 450 FU-HS 128. The Easyclick receiver is used to switch lighting and other electrical consumers. - With support plate for screw fastening in switch boxes with 60 mm distance of the device screws - With buckle bar for the recording of the button set D xx.420.xx to the local switch Different functions and parameters can be selected. With a button: - One-click (default function) - One-click (push) - One-click (push) - A-button (push) - A-button (push) with a selectable running time and a switch-off time - A single-button (ON / OFF (default function) - A single-click (switch) - A parallel and a single-click (switch) - A single-click (switch) - A single-click (switch) - A single-click (switch) - A single-click (switch) - A single-button (switch) - A-button (switch) - A-button (switch) - A-button (switch) - 32 channels can be individually set up. - Independent of the set functions, integrated repeater functions (1-level / 2-level) can be switched on depending on the project. - When learning, for example, window contacts, window grips and motion detectors, these are already assigned in the appropriate function / parameter. Technical data: own-consumption: & lt, 0.5 W (bistabile relay) transmission frequency: 868.3 MHz power supply: 100-240 V ~ / 50-60 Hz neutral conductor: required ambient temperature: -20 ° C to + 40 ° C storage temperature: -40 ° C to + 85 ° C plug terminals: max. 1 x 1.5 mm ² housing height: 34 mm Protection type: IP 20 With support plate: for screw mounting in switch cans Apparatus: CE, KEMA / KEUR Lasting 230 V ~ (110 V ~) filament lamps 2500 W (1250 W) HV- halogen lamps 1200 W (600 W) motor load 600 VA (300 VA) EVG load 3 pieces (3 pieces) The number depends on the type and the manufacturer. The data sheet of the device must be taken into account!