DFS4 080-4 / 0.30-B NK S, Doepke FI protection switch 4p, 80 A, 0.3 A, type B NK, sel, N-li

Doepke FI protection switch 4p, 80 A, 0.3 A, type B NK, sel, N-li

The power supply (RCCB) switches off when dangerous high error flows occur. They thus protect persons, animals and plants. DFS 4 is a two or four-pole power control switch for one or three-phase networks. In standard design, the compact devices are four units narrow. They are available with many different types of error current and versions for measuring currents up to 125 A. The large double-deck clamps can also record large circuit cross sections. The triggering of the multi-function switch button facilitates the troubleshooting. The free label software helps with the labelling. Type B switches are all-current sensitive at frequencies from 0 Hz (smooth DC) to 150 kHz. They are increased shock current and maternal. The NK series of all-current sensitive error control switches offer the classic fire protection of 300 mA at frequencies from 0 to 150 kHz. They are optimized for fire-prone operations. Selective power control switches are used in systems with stacked distributions. In the event of an error, only the switch in which the error current is present is triggered. The selective RCCB offer fire and error protection (when touching indirectly), but not additional protection (direct touching, personal protection). Standard-version devices are designed for the monitoring of circuits with a measurement voltage of 230 V, 400 V and a measuring frequency of 50 Hz. Characteristics: selectively to all undelayed RCCB, all-current-sensitive to frequency and mixed-frequency error flows from 0 Hz (smooth direct current) to 150 kHz, power-independent trigger for type A error flows, voltage-dependent detection of smooth DC-current and AC-related flows with frequencies of not more than 50 / 60 Hz, full operation with power-voltage connections from at least 50 V AC to any two active conductors, low component size for all measurement flows, high short-circuit strength, double-deck terminals for large circuit section and rail connection, for example, high-frequency control systems, high-speed control systems, high-speed control systems, high-speed control systems, high-speed, high-speed control systems, high-speed control systems, high-speed, high-speed control systems, high-speed control systems, high-speed control systems, high-speed, high-speed control systems, high-speed, high-speed control systems, high-speed control systems, high-speed, high-speed, high-speed control systems, high-speed, high-speed, high-speed control systems, high-speed, high-speed control systems, high-speed, high-speed, high-Selective power protection switches protect the cables from the main distribution to the subdivisions, information: suitable for use in 50-Hz AC networks, RCCB for other frequencies on request, not for use in DC networks and on the output side of controlled electrical equipment such as: For example, frequency inverters are designed to ensure selectivity of the RCCB. The measurement error current of the selective RCCB shall be selected at least one step higher than that of the undelayed switch downstream.