00090280, WD90 cable box 90x280x270 mm (HxBxT) cable lock for wall and ceiling S90

WD90 cable box 90x280x270 mm (HxBxT) cable lock for wall and ceiling S90

WD90 cable box "System Wichmann" ® Z-19.15-20. Fire-resistant S90 disclosures of cable transmissions in ceilings, walls and on request in system floors. The cable box is made of a galvanized steel sheet housing, lined with fire-resistant material. The fire is functionally separated from the calamity seal and works independently of the seal. The function of the cable box is not interrupted during the post-installation work. The cable closure is supplied as an industrial pre-made and functional and assembly-ready component and is masked or engraved on site. False and overlay are almost excluded due to construction. The contained EasyFoam foam stoppers are used for calvary sealing. They have a much lower density and are therefore easier and faster to process than for example fire protection stopper. The sealing to the cables and to the housing is carried out with a permanent elastic sealant (e.g. silicone or acrylic) or with the EasyFoam fire protection mounting foam B1. Installation in light partitions and massive walls of 100 mm or more. In massive ceilings of 150 mm thickness. The cable box can be filled 100% with cables of all kinds (without any limitation of the cable diameter) and with electric installation empty tubes according to DIN EN 61386 with and without cable installation up to a diameter of 63 mm. In addition, the sealed cable box can be installed as a reserve sheet without any capacity. At occupancy no distances between cables, cables and empty pipes and empty pipes are necessary. Within the empty tubes there is no additional limitation of the cable types and the cable diameter. The cable box is also suitable for subsequent installation, as all cable boxes can be opened. In addition, the cable box can be replicated at any time with full maintenance. The assembly is carried out according to the attached assembly instructions or ABG Z-19.5- 2517. No processor certification is necessary for the installation. Solutions for wooden beamed ceilings and pipes on request.