602026 / 80-000-95-1000-40-10-00-000-00-6 / 710, safety temperature limit with opening contact, 95 ° C, transmission line 1000mm

Safety temperature limiter with opening contact, 95 ° C, transmission line 1000mm

Due to its galvanized steel sheet housing, the 1-pole mechanical thermostat is very robust and can also be used under harsh conditions. The measuring system used is based on the fluid expansion principle and can be used without any problems up to a maximum permissible sensor temperature of 110 ° C. The smooth copper round sensor has a diameter of 6 mm with a sensor length of about 84 mm. The transmission of the thermostat is also made of copper and can be moved flexibly with respect to a 5 mm bending radius. The maximum permissible ambient temperature at the switch head (protection type IP00) is 80 ° C. The switch head fastening is done by means of a central fastening by a fastening nut M10 x 1. The shutdown point is fixed on the work side. The safety temperature limiter is characterized by a high switching point accuracy of + 0 / -5 K. A key advantage is that no additional auxiliary energy is required for temperature measurement. The electrical connection is made to the flat plug (A 6.3 x 0.8 DIN 46244) of the switch set, which can directly switch a maximum permissible switching power of AC 230 Volt / 16 A. The thermostat has an unlocking difference of about 10 K, after which the device can be unlocked simply by pressing a button. The temperature limiter is very flexible and is used in both heating, air conditioning and ventilation technology as well as in the plastics industry, equipment and furnace construction, as well as for temperature monitoring in laboratory and climate conditions. The device is approved in accordance with DIN EN 14597 and pressure equipment directive and has UL and EAC approval.