603026 / 0101-1-025-30-0-00-20-13-46-120-15-6 / 000, double thermostat (TR / TR), 0 to 100 ° C, installation length 120 mm

Double thermostat (TR / TR), 0 to 100 ° C, installation length 120 mm

Due to its impact-resistant housing with high-quality plastic cover and aluminium pressure cast base, the mechanical construction double-thermostat is very robust and can also be used under harsh conditions. The device consists of two temperature controllers in which the desired shut-off temperature can be set on a scale independently of each other by means of a set-up. The temperature controllers are characterized by a high switching point accuracy of + 0 / -1.5% in the upper scale and have a switching difference (hysteresis) of about 3 to 4% of the scale. After the switch-off point is reached, the temperature controllers automatically turn back into the original state of the switch-off by the value of the switch-off difference. A key advantage is that no additional auxiliary energy is required for temperature measurement. The electrical connection is made by screw terminals directly on the built-in microswitches, which can directly switch a maximum permissible switching power of AC 230 Volt / 10 A. The measuring systems used are based on the fluid expansion principle and can be used without any problems up to a maximum permissible sensor temperature of 125 ° C. The diving tube made of brass, nickel plated, has a diameter of 15 mm. The mounting is done by a thread G 1 / 2 form A according to DIN 3852 / 2. The maximum permissible ambient temperature on the housing (protection type IP54) is 80 ° C. The thermostat is very flexible in use and is used in heating, air conditioning, ventilation and the plastics industry, equipment and mechanical engineering as well as in furnace construction, district heating and temperature monitoring in laboratory and air conditioning. The device is approved in accordance with DIN EN 14597 and has an EAC approval.