602030 / 01-026-000-25-2000-40-10-6-40-13-460 / 707,, temperature controller with switching contact, 0 to 120 ° C, transmission line 2000mm

Temperature controller with switching contact, 0 to 120 ° C, transmission line 2000mm

Due to its galvanized steel sheet housing, the 1-pole mechanical thermostat is very robust and can also be used under rough conditions. The measuring system used is based on the fluid expansion principle and can be used without any problems up to a maximum permissible sensor temperature of 145 ° C. The smooth copper round sensor has a diameter of 6 mm with a sensor length of about 87 mm. The transmission of the thermostat is also made of copper and can be moved flexibly with respect to a 5 mm bending radius. The first 460mm from the switch head are covered with an electrically insulating PVC protection hose. The maximum permissible ambient temperature at the switch head (protection type IP00) is 80 ° C. The temperature compensation reduces the ambient temperature effect on the head of the switch to a minimum. The switch head fastening is done by means of a mounting bridge by two screws M4 x 28. The desired switch-off temperature can be easily set on a scale with the help of a set-up, which is available as an accessory. The temperature controller is characterized by a high switching point accuracy of + / - 3% in the upper scale. A key advantage is that no additional auxiliary energy is required for temperature measurement. The electrical connection is made to the flat plug (A 6.3 x 0.8 DIN 46244) of the switch set, which can directly switch a maximum permissible switching power of AC 230 Volt / 16 A. The thermostat has a switching difference (hysteresis) of approx. 3 K and switches automatically back to the original state after the switch-off temperature is below. The temperature controller is very flexible and can be used in the heating, air conditioning and ventilation technology as well as in the plastic industry, the equipment and furnace construction, as well as for temperature monitoring in laboratory and climate cabinets. The device is approved in accordance with DIN EN 14597 and has UL and EAC approval. The device is roHS-compliant and cadmium-free.