603026 / 0202-1-025-30-0-00-20-13-46-200-15-6 / 000, double thermostat (TW / TW), 0 to 100 ° C, installation length 200mm

Double thermostat (TW / TW), 0 to 100 ° C, installation length 200mm

Due to its impact-resistant housing with high-quality plastic cover and aluminium pressure cast base, the mechanical construction double-thermostat is very robust and can also be used under harsh conditions. The device consists of two temperature guards, in which the desired switch-off temperature can be set on a scale independently of each other by means of a screw-off. & lt, br & gt, The temperature guards are characterized by a high switching point accuracy of + 0 / -1.5% in the upper scale and have a switching difference (hysteresis) of about 3 to 4% of the scale. After the switch-off point is reached, the temperature guards automatically turn back into the original state of the switch-off by the value of the switching difference. A key advantage is that no additional auxiliary energy is required for temperature measurement. The electrical connection is made by screw terminals directly on the built-in microswitches, which can directly switch a maximum permissible switching power of AC 230 Volt / 10 A. & lt, br & gt, The measurement systems used operate according to the fluid expansion principle and can be used without any problems up to a maximum permissible sensor temperature of 125 ° C. The diving tube made of brass, nickel plated, has a diameter of 15 mm. The mounting is done by a thread G 1 / 2 form A according to DIN 3852 / 2. The maximum permissible ambient temperature on the housing (protection type IP54) is 80 ° C. & lt, br & gt, The thermostat is very flexible to use and is used in the heating, air conditioning and ventilation technology as well as in the plastics industry, equipment and mechanical engineering as well as in the furnace construction, district heat transfer stations and for temperature monitoring in the laboratory and climate cabinets. The device is approved in accordance with DIN EN 14597 and has an EAC approval.