6FB1103-0AT13-4MB1, SIDOOR MDG3 R transmission output right with a hooker and pass spring for control units A...

SIDOOR MDG3 R gearbox to the right with hooker and pass spring for control units A...

SIDOOR MDG3 R transmission engine, right shaft with Nut- and pass spring A3x5 according to DIN 6888, max. 180kg of moving mass, IP56, 2x M12 for separate motor connection, 30 VDC, -20 to + 50 degrees Celsius The SIDOOR Advanced drives convince by the flexible choice of the drive solution, high protection levels (IP56 for engine and transmission) and an optimized cable solution. Thanks to the delivery of the drive shaft of the transmission with a groove and a fit spring (without a belt wheel), transmission types such as a rack or chain can also be realized as an alternative to the gear belt solution. A separate engine connection is available. This allows the distance between the door control unit and the transmission engine to be installed specifically for application. The SIDOOR Advanced Drives are divided into the line classes MDG3 to 180 kg, MDG4 to 400 kg and MDG5 to 700 kg. In addition, there are the basic drives SIDOOR M3 / M4 / M5. Due to the wide range of transmission engines, a left and right transmission engine variant is always available. As an accessory, all necessary mechanical components, such as redirecting device, fixing angle, door-with-door-with-the-belt are available. A belt or gear wheel, in which the diameter may vary between 28 mm and 122 mm as required, can be made to fit the application itself and mounted on the gearbox. For a standard solution with gear belt transmission, the product range holds a suitable belt wheel. As a replacement for 6FB1103-0AT13-4MB0 SIDOOR MDG180 R, 6FB1104-0AT10-0AS1 SIDOOR MDG-PULLEY 10-S8M-56 and new SIDOOR MDG-CABLE is required.