750-667 / 000-004, Secure digital input / output, 4 / 4 channels, DC 24 V, 2A

Secure digital input / output, 4 / 4 channels, DC 24 V, 2A

Secure digital input / output, 4 / 4 channels, DC 24 V, 2A, PROFIsafeThe module 75x-667 / 000-004 has 4 power outputs (O1... O4), and 4 clock sensitive inputs (I1... I4). The sensors can be fed directly with 24 V or through the 2 different-cut outputs (T1... T2). The inputs can be connected to both potential-free, contact-controlled emergency-out buttons, protective door or mode-of-operation selector switches, as well as safe sensors or secure semiconductor outputs (e.g. light barriers, SPS outputs). The power outputs switch off ohm and inductive loads according to DC 13 with a nominal current of up to 2 A without external additional control. Power outputs can be operated both bipolar (high-side / low-side) and unipolar (common potential on one side of the load). Short circuit, cross-section and 24 V external feed are monitored. The monitoring and other safety-relevant parameters such as the type of operation or The parameter tool can be used in engineering systems, which use the call interface TCI (Tool Calling Interface) with CC2 or CC3 support, be comfortably integrated. Depending on the setting, the parameters are automatically downloaded from a PROFIsafe-compliant iParserver in the control. At the side-mounted encoding switch or alternatively via WAGO-I / O- CHECK, the PROFIsafe address is set. The module supports the PROFIsafe protocols V2.4 (PROFIBUS, PROFINET) and V2.6 (PROFINET) .Field and system levels are galvanically separate. The arrangement of the individual safe modules is optional in the field bus node. If necessary (e.g. line length of the 24V- feed-in of 3 m), to protect against the Surge and Burst, an external filter (V6- 107- or the WAGO) is to be used for a filter range of 106- or a filter. For more information, see the manual (German and English)! The module 75x-667 / 000-004 was developed by UL according to UL / CSA 610-1, UL / CSA 610-2-201 and UL 121201, CSA-C22.2 No The evaluation of functional safety according to the above standards was carried out by TÜV Rheinland.