3S110200, 3S Box 110x200x270 mm (HxBxT) Three-sided cable box for wall / ceiling S90

3S Box 110x200x270 mm (HxBxT) Three-sided cable box for wall / ceiling S90

3S-Box "System Wichmann" ® Z-19.15-20. Fire-resistant S90 disclosures of cable transmissions in ceilings and walls. The three-sided cable box consists of a galvanized steel sheet housing, lined with fire protection agent that is foaming in the case of fire. The fire is functionally separated from the calamity seal and works independently of the seal. The function of the cable box is not interrupted during the post-installation work. The cable closure is supplied as an industrial pre-made and functional and assembly-ready component and is masked or engraved on site. The 3S Box is the ideal lock-off solution for cables and empty pipes, which are led directly to the ceiling through the wall OR to the wall through the ceiling. Since the box has only three sides, the open side between the wall and the The ceiling and the open side of the cable box is a graphite strip. The box is then screwed under the ceiling or to the wall. False and overlay are almost excluded due to construction. The contained EasyFoam foam stoppers are used for calvary sealing. They have a much lower density and are therefore easier and faster to process than for example fire protection stopper. The sealing to the cables and to the housing is carried out with a permanent elastic sealant (e.g. silicone or acrylic) or with the EasyFoam fire protection mounting foam B1. Installation under ceilings in light partitions and massive walls from 100 mm thickness. Installation on solid walls in massive ceilings of 150 mm or more. The cable box can be filled 100% with cables of all kinds (without any limitation of the cable diameter) and with electric installation empty tubes according to DIN EN 61386 with and without cable installation up to a diameter of 63 mm. In addition, the sealed cable box can be installed as a reserve sheet without any capacity. At occupancy no distances between cables, cables and empty pipes and empty pipes are necessary. Within the empty tubes there is no additional limitation of the cable types and the cable diameter. Ideal for dry construction, as the box can already be attached to the ceiling before the wall is finished. This cable box is also very easy to use with existing cabling. For this cable box we offer sheet channel extensions, so that the use is possible even with larger ceiling thicknesses. The assembly is carried out according to the attached assembly instructions or ABG Z-19.5- 2517. No processor certification is necessary for the installation.