P4, Compact flashlight in pen format

Compact flashlight in pen format

LED LENSER ® P4 BM 8404The minimum light bar for ProfisWhether you are looking at a car from below, changing fuses or working industrially, the LED LENSER ® P4 BM with Blue Moon Focus System provides you with good services. The lamp is clicked to the shirt or coat in a flash and so light that it is hardly noticed when wearing. All the more so, the shining light that you can focus on by turning the lamp head (Turning Focus) is on. The LED LENSER ® P4 BM is operated with 2 commercial and inexpensive microcells (AAA). Technical data High End LED Light Flow * 18 lm Light Length * 25 mLight Length * * 8.5 hVoltage Supply 2 x AAA 1.5VEnergy Tanker * * * 3.6 WhSize & Weight Length disfocused 147 mm Head Diameter 14.5 mm Weight (without packaging) 53 Ghousing Color Black Delivery Extensive Safety Bagard Lanyard Manual Penclipper * Light Flow (Lumen / lm) or maximum operating length in the same set of the same type of the same type (s), or in the same set of the same type of the same type of light. for battery-operated lamps with a fully charged battery. If no brightness level is explicitly mentioned, the values refer to the Boost function; if a Boost function is not present in the respective product, the values refer to the brightest settings available in the respective product. These are average values which may vary by + / - 15% in individual cases depending on the chip and battery / battery. A boot function is available several times, but only for a short time. * * Average light time (h) in the respective setting specified in the table or in the flow text up to a luminous current of 1 lumens. If no level of brightness is mentioned, the values refer to the low power function; if a low power function is not available for the product, the values refer to the lowest setting available for the product. A boot function (if available) is available several times, but only for a short time. * * * Calculative value of the capacity in watts (Wh). This shall apply to the battery (s) contained in the delivery state of the respective article or, in the case of lamps with battery for the battery (s) contained in it, in the fully charged state.