Cflex H1-LM T 3500-830 ETDD 03, Multivar. Coriflex lens silver ETDD 33W 3400lm Narrow (N) IP40 3 SDCM

Multivar. Coriflex lens silver ETDD 33W 3400lm Narrow (N) IP40 3 SDCM

LED fast-mounting lamp in light-band design. Design as centre module for LED light bands. Attach to rope or chain suspension or directly to the ceiling. Modules can be replaced without tools. In combination with blind modules, light-band modules can be put within a light-band without tools. Optical system consisting of a PMMA refractor reflector system with centrally integrated high-power LED. With symmetrically low luminous intensity distribution. High visual comfort due to contrast-reducing effect of the refractor surface. Rated light current 3400 lm, rated power 33,00 W, light output 103 lm / W light color hot white, similar colour temperature (CCT) 3000 K, general colour rendering index (CRI) Ra > 80. Initial MacAdam colour tolerance ≤ 3 SDCM. The light source is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Modular outer housing made of extruded aluminium with exactly planned visibility and fine edge radii. Lying on the inside, in steel sheet. Surface silver grey coated (RAL 9006). Module length 1130 mm. Permissible ambient temperature (ta): -20 ° C - + 25 ° C. Protection class (EN 61140): I, protection type (DIN EN 60529): IP40, shock strength according to IEC 62262: IK07, test temperature filament wire test according to IEC 60695-2-11: 650 ° C. Weight: 4.5 kg. Work side wired with 7 heat-resistant single-cell lines 2.5 mm2. Modules can be plugged into a light band without any tools, the electrical connection is automatic. Free choice of the external head even with the used device carrier possible at any time without tools. Connection to the cover-side connected power supply through integrated 7-pin plug terminal up to 2.5 mm2 in each light band module possible. With electronic operating equipment, digital dimmable (DALI). Operating equipment according to DALI-2 standard (EN 62386). The equipment is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). The lamp can be equipped with the monitoring ready (MOR) functionality on request. The product meets the essential requirements of the applicable EU Directives and the Product Safety Act and bears the CE marking. In addition, the lamp is certified by an independent test body ENEC.