Cuvia 40-AB2L-LR / 2200-740 4G1S ET, Mast lamps Cuvia 40 CLO (normal) Lens anthracite other ET 17.50W 2200lm 70 asim. wide-radiant (AB2L) IP66 IK09 5 SDCM

Mast lamps Cuvia 40 CLO (normal) Lens anthracite other ET 17.50W 2200lm 70 asim. wide-radiant (AB2L) IP66 IK09 5 SDCM

For the purposes of this Regulation, the following definitions shall apply: With intelligent label for quick call of light information using QR code. With power reduction via control phase. The switch off of a control phase causes the light current to be set to 50%. Rear and front lamp for mast-head Ø 76 mm. tilt angle for mounting up 0 °, 10 °, adjustable for mounting up -10 °, 0 °. Using separately to order reduction pieces also suitable for use with masts Ø 42, 48 and 60 mm. The mounting is made of stainless steel with two fastening screws according to EN 60598-2-3. In MLT version (multi-lens technology), consisting of high-efficiency, UV and temperature-resistant lens systems in four-fold arrangement. For lighting from roads to P-lighting classes. With asymmetrical wide luminous intensity distribution. With a PMMA lens, right. The subsequent installation of a back / side shielding is possible as an accessory to be ordered separately. Further radiation characteristics are available for flexible adaptation to customer-specific lighting tasks. Light current and light colour fixed, with light current constant at the end of the life (CLO). Measured light current 2200 lm, measuring power 16.5 W, maximum light output 133 lm / W light color neutral white, similar colour temperature (CCT) 4000 K, general colour rendering index (CRI) Ra > 70. Paint site tolerance (initial MacAdam)? 5 SDCM. Other LED light colours available on request. Mean L80 (tq 25 ° C) = 100,000 h The light source is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). 3-step switch for setting different light currents on request. Aluminium die-cast luminaire. Surface anthracite coated (similar to DB 703). Coating high-weather. Sea weather suitable coating on request. With sulphur-free seals. The modular light is made up of the basic element and the light-technology module. The mechanical and electrical connection of the modules is done without tools. Mast available on request. Protection class (EN 61140): II, protection type (DIN EN 60529): IP66, protection type Lamp room: IP66. Bumper strength according to IEC 62262: IK09. Permissible ambient temperature (ta): -20 ° C to 35 ° C. Weight: 6.0 kg. With electronic operating equipment, the operating equipment is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Shock voltage resistance Differential mode / Common mode: 6 kV / 10 kV. The product meets the essential requirements of the applicable EU Directives and the Product Safety Act and bears the CE marking. In addition, the lamp is certified by an independent test body ENEC. Light 10 years, spare parts (LED module, operating equipment, optical system) available 15 years after the invoice date, subject to reasonable changes for progress.