9861I- LR / 2000-840 ET, Mast lamps 986 CLO (normal) reflector black ET 29W 2000lm asym. wide-radiant (AB) IP23 IK04 3 SDCM

Mast lamps 986 CLO (normal) reflector black ET 29W 2000lm asym. wide-radiant (AB) IP23 IK04 3 SDCM

Decorative classic cone lamp for mast mounting. With intelligent label for quick call of light information using QR code. With power reduction via control phase. The switch off of a control phase causes the light current to be set to 50%. For mast-head Ø 76 mm. Using separately to order reduction pieces also suitable for mounting on masts with zopf Ø 60 mm. Matching mast on request. Optical system made of high-shine, anodized aluminium. With asymmetrical wide luminous intensity distribution. Light current and light colour fixed, with light current constant at the end of the life (CLO). Measured light current 2000 lm, measuring power 24 W, maximum light output 83 lm / W light color neutral white, similar colour temperature (CCT) 4000 K, general colour rendering index (CRI) Ra > 80. Color site tolerance (initial MacAdam)? 3 SDCM. Mean L80 (tq 25 ° C) = 50,000 h. The light source is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Lamp body made of aluminium die-cast, light roof made of corrosion-resistant aluminium, high-weather powder coated. Color lamp body and roof outside deep black, similar to RAL 9005. Light roof inside white powder coated. Sea weather suitable coating on request. Cover from high-impact PMMA in cone form, clear. Lamp cover can be pushed up in self-rigid service position. Mast available on request. Protection class (EN 61140): II, protection type (DIN EN 60529): IP23, protection type Lamp room: IP65. Bumper strength according to IEC 62262: IK04. Permissible ambient temperature (ta): 25 ° C Weight: 8.4 kg. With electronic operating equipment, switchable. The equipment is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Electroblock can be replaced with all electrical components without tools. Shock voltage resistance Differential mode / Common mode: 6 kV / 10 kV. The product meets the essential requirements of the applicable EU Directives and the Product Safety Act and bears the CE marking. In addition, the lamp is certified by an independent test body ENEC. Light 10 years, spare parts (LED module, operating equipment, optical system) available 15 years after the invoice date, subject to reasonable changes for progress.