9311 AB7L-LR / 3500-730 4G1S ET, mast lamps 931 CLO (normal) lens black ET 29W 3500lm 70 asim. wide-radiant (AB7L) IP23 IK10 5 SDCM

Mast lamps 931 CLO (normal) Lens black ET 29W 3500lm 70 asym. wide-radiant (AB7L) IP23 IK10 5 SDCM

Decorative LED mast lamp in arched form. With intelligent label for quick call of light information using QR code. With power reduction via control phase. The switch off of a control phase causes the light current to be set to 50%. Mounting on mast or wall mounting. Matching mast on request. Optical system in multi-lens technology (MLT). Lamp optics consisting of high-efficiency, UV and temperature-resistant lens systems. With asymmetrical wide luminous intensity distribution. For the lighting of roads according to M5 and M6 lighting classes, a road width to light point height ratio of 0.4 to 0.8. Further radiation characteristics are available for flexible adaptation to customer-specific lighting tasks. The subsequent installation of a back / side shielding is possible as an accessory to be ordered separately. Light current and light colour fixed, with light current constant at the end of the life (CLO). LED system consisting of 4 LED modules. Ra > 70. Paint site tolerance (initial MacAdam)? 5 SDCM. Other LED light colours available on request. Mean L80 (tq 25 ° C) = 100,000 h The light source is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Light body made of corrosion-resistant aluminium, color on the outside deep black, similar to RAL 9005, inside white, powder-coated, high-weather-proof. Sea weather suitable coating on request. Closing pan from high-impact PMMA, clear, fine-grained. With a stainless steel screw securely attached. Mast available on request. Protection class (EN 61140): II, protection type (DIN EN 60529): IP23, protection type Lamp room: IP65. Bumper strength according to IEC 62262: IK10. Permissible ambient temperature (ta): 25 ° C Weight: 5.9 kg. Device carrier easily removable by connection. Electric connection to 3-pin book part of the plug connection up to 2.5 mm2. With train load. With electronic operating equipment, switchable. The equipment is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Shock voltage resistance Differential mode / Common mode: 6 kV / 10 kV. The product meets the essential requirements of the applicable EU Directives and the Product Safety Act and bears the CE marking. In addition, the lamp is certified by an independent test body ENEC. Light 10 years, spare parts (LED module, operating equipment, optical system) available 15 years after the invoice date, subject to reasonable changes for progress.