Publica P1W-AB2L-LR / 3800-730 6G1S ET, Mast Lamps Publica P1 CLO (normal) Lens anthracite around ET 41W 3800lm 70 asim. wide-radiant (AB2L) IP23 IK08 5 SDCM

Mast lamps Publica P1 CLO (normal) lens anthracite around ET 41W 3800lm 70 asym. wide-radiant (AB2L) IP23 IK08 5 SDCM

Decorative mast support lamp with curved, high-impact PMMA closing pan, mast support parabolic. With intelligent label for quick call of light information using QR code. With power reduction via control phase. The switch off of a control phase causes the light current to be set to 50%. Mast-mounted lamp for mast-head Ø 76 mm, the mast-fitting is made of stainless steel with two fastening screws according to EN 60598-2-3. Using separately to order reduction pieces also suitable for mounting on masts with zopf Ø 60 mm. Matching mast on request. Optical system in multi-lens technology (MLT). Lamp optics consisting of high-efficiency, UV and temperature-resistant lens systems. With asymmetrical wide luminous intensity distribution. Optimized for horizontal alignment of the lamp body. Further radiation characteristics are available for flexible adaptation to customer-specific lighting tasks. The subsequent installation of a back / side shielding is possible as an accessory to be ordered separately. Light current and light colour fixed, with light current constant at the end of the life (CLO). With 6 LED modules. LED module consisting of four LEDs, including optical system. Ra > 70. Paint site tolerance (initial MacAdam)? 5 SDCM. Other LED light colours available on request. Mean L80 (tq 25 ° C) = 100,000 h The light source is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Aluminium die-cast luminaire. Surface anthracite coated (similar to DB 703). Sea weather suitable coating on request. Adjustable angle adjustment in 10 ° steps between 0 ° and 90 °. With curved closing pan made of high-impact PMMA. Mast available on request. Protection class (EN 61140): II, protection type (DIN EN 60529): IP23, protection type Lamp room: IP66. Bumper strength according to IEC 62262: IK08. Permissible ambient temperature (ta): 35 ° C Weight: 8.7 kg. Appliances with all electrical components and LED modules mounted as a top lamp. After dissolving four V2A fasteners can be removed. With operating equipment, switchable. The equipment is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Shock voltage resistance Differential mode / Common mode: 6 kV / 10 kV. The product meets the essential requirements of the applicable EU Directives and the Product Safety Act and bears the CE marking. In addition, the lamp is certified by an independent test body ENEC. Light 10 years, spare parts (LED module, operating equipment, optical system) available 15 years after the invoice date, subject to reasonable changes for progress.