SFlow C3-L MRWD LED4000-840 ETDD LLWS 01, installed lamps Solvan Flow C Diffusor white ETDD 33W 4000lm Lambertian (L) IK03 3 SDCM

Solvan Flow C Diffuser white ETDD 33W 4000lm Lambertian (L) IK03 3 SDCM

LED lamp for single or light band applications. With integrated LiveLink sensor for connection to a LiveLink control unit for day-light control and presence recording. LiveLink sensor IR Micro for day-light control and presence recording. Constant light control with a shutdown function with sufficient daylight. Passive infrared presence sensor, with highly sensitive multisegment pyrosensors, with adjustable shutdown time, either in automatic operation (automatic on, automatic off) or semi-automatic operation (automatic off, manual on). Special IQ mode for automatic adaptation of the afterlife to space use. Electrical supply via the DALI interface of the control unit. Approved 2 DALI participants. Quadratic recording, recording squares presence max. 4 m x 4 m (16 m2) / Radial max. 4 m x 4 m (16 m2) / tangential max. 6 m x 6 m (36 m2) at a recommended mounting height of 2.8 m, allowed mounting height 2.5 m to 4 m For installation in sawn ceiling openings. With separately ordered installation accessories also suitable for use in panel ceilings (SFlow ZBP L2). For panel ceilings in module 100. Continuous light bands by connecting the lamp bodies by means of non-tool assembly technology. Optical system in microreflector technology (MRWD) with high-efficiency, white-polished reflector chambers made of plastic with diffuser disc for a uniformly illuminated picture with the highest visual comfort. With additional, integrated in the optical system, clear cover for space-wide-wide closure and protection of the LED. Decent lateral light decoupling over the entire length of the lamp. With lambertic light intensity distribution. Ejection angle 87 °. Light current and light color fixed. The LED system and the light optics as a assembly are to be used without tools in light bodies. Assembly with steel rope secured from crash during assembly. rated light current 4000 lm, rated power 33 W, maximum light output 121 lm / W light color neutral white, similar colour temperature (CCT) 4000 K, general colour rendering index (CRI) Ra > 80. Color site tolerance (initial MacAdam)? 3 SDCM. Mean L80 (tq 25 ° C) = 50,000 h. The light source is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Lamp made of sheet steel. White coated surface (similar to RAL 9016). Dimensions (L x B): 1473 mm x 100 mm, lamp height 45 mm. Protection class (EN 61140): I, protection type (DIN EN 60529): IP20, shock strength according to IEC 62262: IK03, test temperature filament wire test according to IEC 60695-2-11: 650 ° C. Permissible ambient temperature (ta): -20 ° C to 25 ° C. Weight: 4,3 kg. Net-side connection is done by means of plug-in terminals. Electrical connection of the assemblies is done independently. With electronic operating equipment, digital dimmable (DALI). Operating equipment according to DALI-2 standard (EN 62386). Lamp can be switched and dimmable via DALI control clamps (Touch DIM). The equipment is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). The lamp is monitoring ready (MOR) and provides light data for monitoring or forward-looking maintenance. It is compatible with the TRILUX monitoring services. The product meets the essential requirements of the applicable EU Directives and the Product Safety Act and bears the CE marking. In addition, the lamp is certified by an independent test body ENEC. Light 10 years, spare parts (LED module, operating equipment, optical system) available 15 years after the invoice date, subject to reasonable changes for progress.