9701SG-AB2L-LRA / 2600-740 4G2 ET, Luminous Lamps Lumega 600 CLO (normal) Lens multi-coloured ET 20W 2600lm 70 asym. wide-blasting (AB2L) IP66 IK09 5 SDCM

Lamps for fattening Lumega 600 CLO (normal) lens multi-coloured ET 20W 2600lm 70 asym. wide-radiant (AB2L) IP66 IK09 5 SDCM

LED support and approach lamp. With intelligent label for quick call of light information using QR code. With self-sufficient power reduction via integrated evaluation electronics. Reduction of the light current to 50% for a period of 7 hours (-2h / + 5h), distributed by a daily new centre of the switching time. Rear and front lamp for mast-head Ø 76 mm. Angle of inclination for mounting up 0 °... 25 °, adjustable for mounting up 0 °... 15 °. The mounting is made of stainless steel with two fastening screws according to EN 60598-2-3. Using separately to order reduction pieces also suitable for mounting on masts with zopf Ø 42, 48 and 60 mm. Matching mast on request. Optical system in multi-lens technology (MLT). Lamp optics consisting of high-efficiency, UV and temperature-resistant lens systems. With asymmetrical wide luminous intensity distribution. Further radiation characteristics are available for flexible adaptation to customer-specific lighting tasks. The subsequent installation of a back / side shielding is possible as an accessory to be ordered separately. Light current and light colour fixed, with light current constant at the end of the life (CLO). Measured light current 2600 lm, measuring power 19.5 W, maximum light output 133 lm / W light color neutral white, similar colour temperature (CCT) 4000 K, general colour rendering index (CRI) Ra > 70. Paint site tolerance (initial MacAdam)? 5 SDCM. Other LED light colours available on request. Mean L80 (tq 25 ° C) = 100,000 h The light source is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). 3-step switch for setting different light currents on request. Aluminium die-cast luminaire. The lamp body (primary colour) and the point of rotation (additional colour) are removed in colour. Light of two-colour, light-grey and anthracite-grey powder-coated, high-weather-resistant (similar to RAL 7035 / RAL 7016). Sea weather suitable coating on request. LED module consisting of an aluminium die-cast housing with integrated LED and optical lens systems. With a sealed, clear cover from PMMA. The LED module and the mounted operating unit form an easily interchangeable function unit. The lamp housing shall be opened without tools by means of lever closures. Mast available on request. Protection class (EN 61140): II, protection type (DIN EN 60529): IP66, shock strength according to IEC 62262: IK09. Permissible ambient temperature (ta): 25 ° C Weight: 9,5 kg. With mounted connection line. Length of the connection line 8 m. Conveyor M20 as a train load for cable diameter 6 mm to 12 mm. With electronic operating equipment, switchable. The equipment is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Shock voltage resistance Differential mode / Common mode: 6 kV / 10 kV. The product meets the essential requirements of the applicable EU Directives and the Product Safety Act and bears the CE marking. In addition, the lamp is certified by an independent test body ENEC. Light 10 years, spare parts (LED module, operating equipment, optical system) available 15 years after the invoice date, subject to reasonable changes for progress.