Jovie50-AB2L4LR-32-730-ET-CAE-26, Jovie 50 CLO (normal) lens anthracite rectangular ET 25W 3200lm 70 asym. wide-radiant (AB2L) IP66 IK09 5 SDCM

Mast lamps Jovie 50 CLO (normal) lens anthracite rectangular ET 25W 3200lm 70 asym. wide-radiant (AB2L) IP66 IK09 5 SDCM

Versatile mast external light in reduced, international form language and flat design. With intelligent label for quick call of light information using QR code. Compact design, length light head 450mm. In combination with the separately ordered mast attachment, use as a mast support lamp (zopf measure Ø 76 mm / Ø 60 mm) or a mast set lamp (zopf measure Ø 42 mm / Ø 60 mm). The tilt of the lamp head is adjustable. Angle of inclination for assembly of the device o °, -5 °, -10 °, angle of inclination for assembly of the device 0 °, 5 °, 10 °, 15 °. In MLT version (multi-lens technology), consisting of high-efficiency, UV and temperature-resistant lens systems in four-fold arrangement. Asymmetrical wide-beam light intensity distribution for lighting of roads by P-lighting classes and M-lighting classes with a road width-to-light point height ratio of up to 2,0. Further radiation characteristics are available for flexible adaptation to customer-specific lighting tasks. The light source can be replaced by qualified personnel. The LED system consists of MLT LED modules with 4 LED each. Number of modules: 4. Rated light current 3,200 lm, Rated power 24,0 W, Luminaire light output 133 lm / W power factor? 0,90. Efficiency performance with material-optimized LED number. General color rendering index (CRI) > 70, similar color temperature (CCT) 3000 K. Other LED light colours available on request. Mean LCLO (tq 25 ° C) 100.000. The light source is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Aluminium die-cast luminaire. Color DB703 Anthracite. Sea weather suitable coating on request. With PMMA lens, printed. The lens can be individually printed on the customer's request. Visible label protected from weather effects behind the lens on request. Protection class (EN 61140): 02, protection type (DIN EN 60529): 66, shock strength according to IEC 62262: IK09. Mast available on request. Wind attack area Fw (m ²) = 0. Weight: 4.3 kg. The lamp is connected without opening the lamp body through the external connection line. The operating equipment can be replaced by qualified personnel. Length of the connection line: 8 m. With electronic operating equipment and power reduction via control phase. Reduction to 50% of the light current after the control phase has been shut down. Parable ballast with light current constant holding (CLO). Connection power at the end of the service life: 25.00 W. The equipment is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). The lamp meets the requirements of the applicable EU Directives and the Product Safety Act (CE marking). In addition, it is certified by an independent audit body ENEC. Shock voltage resistance Differential mode / Common mode: 6 kV / 10 kV. The lamp meets the requirements of EN 60598 and is designed for wind effects according to EN 1991 (Eurocode) with a base wind speed of up to 30m / s (corresponding to wind zone 4 in Germany) in the off-site category 1. A snow elast (up to 1kN / m ²) and ice (up to 2 cm) are taken into account at a light point height according to the assembly instructions. Exposed sites (e.g. bridges, assembly on buildings or directly next to railway tracks) are not included. The impact loads are not taken into account. With Triux-Repurchase promises: The lamp is 10 years, spare parts (LED module, operating equipment and optical system) available 15 years after the invoice date. Reportable changes that serve progress are reserved.