Nextrema G3 XB 60-840 ET + HFS TWP PC, Humidity Lights Nextrema lens anthracite ET 39W 5900lm Extreme Wide (XW) IP66 IK08 3 SDCM

Moisture lamps Nextrema lens anthracite ET 39W 5900lm Extreme Wide (XW) IP66 IK08 3 SDCM

LED humidity light. Type Phoenix. With integrated HF motion sensor. With integrated HF motion sensor. Form of the coverage range elliptical, length of the coverage range up to 12 meters, width of the coverage range up to 8 m. With the IR remote control available as an accessory, the function parameters signal strength, holding time, as well as in conjunction with the ETDD type of circuit lamps, can be set light value and dimm level. Suitable for use in HACCP, IFS and / or BRC Global Standard Food certified companies. Mounting lamp for humidity and covered outdoor areas. With limited surface temperature, suitable for use in fire-prone rooms according to DIN EN 60598-2-24. For ceiling and wall and suspended assembly. Mounting clips and triangulas for suspended assembly included. Suitable for mounting on a support rail 190 VZ. In the case of a wall assembly, the lamp shall be protected from unwanted disassembly by means of accessories to be ordered separately (ZB ATL1). Optical system consisting of primary systems with PC- diffuser. With symmetrical extremely wide light intensity distribution. Light current and light color fixed. Measured light current 5900 lm, measuring power 39 W, maximum light output 151 lm / W light color neutral white, similar colour temperature (CCT) 4000 K, general colour rendering index (CRI) Ra > 80. Color site tolerance (initial MacAdam)? 3 SDCM. Mean L80 (tq 25 ° C) = 85.000 h. Aluminium die-cast luminaire. Robust design with shock-free components. Color light body anthracite, dimensions (L x B): 1047 mm x 96 mm, light height 98 mm. Protection class (EN 61140): I, protection type (DIN EN 60529): IP66, shock strength according to IEC 62262: IK08, test temperature filament wire test according to IEC 60695-2-11: 850 ° C. Permissible ambient temperature (ta): -30 ° C to 35 ° C. Weight: 3,6 kg. With a death-side connection plug type Phoenix. The electrical connection is done without tools. The train load of the connection line is done by means of the M25 connection of the quick connection connector. The lamp is suitable for operation on a 230V DC. With electronic operating equipment, switchable. The product meets the essential requirements of the applicable EU Directives and the Product Safety Act and bears the CE marking. In addition, the lamp is certified by an independent test body ENEC. Lamp available 10 years after the invoice date, subject to reasonable changes that serve progress. Spare parts (LED module, operating equipment, optical system) are not available due to design.