ArimoFit M73 DW19 IP 42-840 ETDD, installed lamps Arimo Fit C Diffusor white ETDD 26W 4200lm Wide reduced glare UGR19 (W19) IK03 3 SDCM

Appliances Arimo Fit C Diffusor white ETDD 26W 4200lm Wide reduced glare UGR19 (W19) IK03 3 SDCM

Square LED lamp with translucent cover DW. M73 (600 mm x 600mm). Design with room-side increased protection type IP54. The lamp can be optionally equipped with an emergency light system for the ceiling installation with an emergency light operating time of 3 hours. In the type of emergency light, the light current is 575 lm. To create a deeper spatial effect. For system ceilings with visible support rails. The lamp body closes with the cover system on the room side. The Skyframe, which is optionally available as an accessory, has a space-sensitive depth effect in the classic, flat module ceiling, the 3-dimensional contour of a skylight is reproduced. The optical system consists of a translucent, yellowing-free PMMA cover with high transmission level. The surface of the cover is smooth and free of visible, microprismatic structures. With symmetrically limited wide luminous intensity distribution. Radiation angle 68 °. Binding assessment according to UGRs classification (EN 12464-1) < 19. Screen-friendly according to EN 12464-1 by limited light density L? 3000 cd / m2 for radiating angles above 65 ° around. Harmonic light effect by uniformly illuminated light output. Individual design of the light-emitting surface (e.g. by printing) and other special solutions possible on request. Light current and light color fixed. Measured light current 4200 lm, measuring power 26 W, maximum light output 162 lm / W light color neutral white, similar colour temperature (CCT) 4000 K, general colour rendering index (CRI) Ra > 80. Color site tolerance (initial MacAdam)? 3 SDCM. Mean L80 (tq 25 ° C) = 100,000 h., mean L90 (tq 25 ° C) = 50,000 h. The light source is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Lamp body made of aluminium continuous pressure profile. White coated surface (similar to RAL 9016). Light dimensions (L x B x H): 596 mm, 596 mm, 22 mm. The narrow flank profile closes with the support rail. The light frame 3-dimensional is profiled to create a depth effect in the ceiling. Lamp can be covered with insulation material at ta 25 ° C, ta35 ° C without insulation material also usable. Protection class (EN 61140): II, protection type (DIN EN 60529): IP20, protection type room-side: IP54, shock strength level according to IEC 62262: IK03, test temperature filament wire test according to IEC 60695-2-11: 650 ° C. Permissible ambient temperature (ta): 25 ° C. Weight: 3.4 kg. High-speed padding with power transmission up to ± 2,5 mm2. Connection of the ballast to the lamp by plug and play. The packaging concept of the lamp allows separate removal of the operating equipment for pre-assembly, the other components of the lamp remain protected until final assembly. With external operating equipment, digital dimmable (DALI). Operating equipment according to DALI-2 standard (EN 62386). Lamp can be switched and dimmable via DALI control clamps (Touch DIM). The equipment is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Operating equipment is legible and protected from misconnection, short circuit, overload and overtemperature. Output ripple of the operating unit? 4% for effective control of the LED system and flicker-free light. The lamp is monitoring ready (MOR) and provides light data for monitoring or forward-looking maintenance. It is compatible with the TRILUX monitoring services. The product meets the essential requirements of the applicable EU Directives and the Product Safety Act and bears the CE marking. In addition, the lamp is certified by an independent test body ENEC. The lamp is part of a range of mounting, mounting and hanging lamps that are aligned in the appearance. The range of applications of the product range is further underlined by variants in the range of light current packages, light distribution curves and protection types. On request, the basic range can be extended with project-specific lighting features. Light 10 years, spare parts (LED module, operating equipment, optical system) available 15 years after the invoice date, subject to reasonable changes for progress.