ArimoFit M84 PW19 42-940 ETDD, Wannenlagen, Fitted Lamp, Prismatic Wide (19) (P-W19), Elektronik Trafo DALI DIM ETDD, 36W, 4200lm, 940, IP20, 621x621x22, white

Beam lamp, built-in lamp, Prismatic Wide (19) (P-W19), electronics Trafo DALI DIM ETDD, 36W, 4200lm, 940, IP20, 621x621x22, white

Quadratic LED lamp with microcrismatic cover PW. M84 (625 mm x 625 mm). The lamp can be optionally equipped with an emergency light system for the ceiling installation with an emergency light operating time of 3 hours. In the type of emergency light, the light current is 575 lm. To create a deeper spatial effect. LED inlay lamp for system ceilings with visible support rails. The lamp body closes with the cover system space side. In combination with installation accessories also suitable for sawn ceiling sections. The assembly in sawn openings using mounting accessories requires a ceiling material thickness of 18 mm - 40 mm. The optical system consists of a highly efficient PMMA cover with microrismatics. PW (prismatic wide). The microstructured PMMA prism surface of the optical system has a defoliating effect, is yellowish-free and does not cloud. With deep-wide light intensity distribution. Binding assessment according to UGRs classification (EN 12464-1) < 19. Screen-based according to EN 12464-1 by limited luminance L ≤ 3000 cd / m2 for radiating angles above 65 °. Harmonic light effect by uniformly illuminated light output. Individual design of the light-emitting surface (e.g. by printing) and other special solutions possible on request. Measured light current 4200 lm, measuring power 36,00 W, light output 116 lm / W light color neutral white, similar colour temperature (CCT) 4000 K, general colour reproduction index (CRI) Ra > 90. Paint site tolerance (initial MacAdam) ≤ 3 SDCM, mean measurement life L80 (tq 25 ° C) = 100,000 h, mean measurement life L90 (tq 25 ° C) = 50,000 h Lamp body made of aluminium continuous pressure profile. White coated surface (RAL 9016). Weight: 3.5 kg. The narrow flank profile closes with the support rail. The light frame 3-dimensional is profiled to create a depth effect in the ceiling. Lamp can be covered with insulation material at ta 25 ° C, ta35 ° C without insulation material also usable. Protection class (EN 61140): II, protection type (DIN EN 60529): IP20, protection type room-side: IP40, shock strength level according to IEC 62262: IK02, test temperature filament wire test according to IEC 60695-2-11: 650 ° C. High-speed padding with power transmission up to ± 2,5 mm2. Connection of the ballast to the lamp by plug and play. The packaging concept of the lamp allows separate removal of the operating equipment for pre-assembly, the other components of the lamp remain protected until final assembly. With external operating equipment, digital dimmable (DALI). Operating equipment according to DALI-2 standard (EN 62386). Operating equipment is legible and protected from misconnection, short circuit, overload and overtemperature. The operating equipment is interchangeable. Output ripple of the operating unit ≤ 4% for effective control of the LED system and flicker-free light. The touch-DIM function allows the switch and dimming of the lamp by means of a button over the DALI-conductor pair. The lamp can be equipped with the functional monitoring ready (MOR) on request. The product meets the essential requirements of the applicable EU Directives and the Product Safety Act and bears the CE marking. In addition, the lamp is certified by an independent test body ENEC. The lamp is part of a range of mounting, mounting and hanging lamps that are aligned in the appearance. The range of applications of the product range is further underlined by variants in the range of light current packages, light distribution curves and protection types. On request, the basic range can be extended with project-specific lighting features.