Creavo M84-TS LW19-03 70-830 ETDD 01, fitted lights Creavo C Lense white ETDD 42W 6700lm Wide reduced glare UGR19 (W19) IK03 3 SDCM

Appliances Creavo C lens white ETDD 42W 6700lm Wide reduced glare UGR19 (W19) IK03 3 SDCM

Quadratic LED ceiling inlay with light elements made of lens systems and cubic dipped elements and high efficiency. M84 (625 mm x 625 mm). The use of the lamp is specifically intended for installation in system ceilings with visible support rails. Further information on the mounting of the lamp and its mounting can be taken from the assembly instructions. The optical system with a precise combination of LED lenses and dipped elements creates a very high visual comfort with very high lighting performance. With symmetrically limited wide luminous intensity distribution. Radiation angle 79 °. Binding assessment according to UGRs classification (EN 12464-1) < 19. Screen-friendly according to EN 12464-1 by limited light density L? 3000 cd / m2 for radiating angles above 65 ° around. Light current and light color fixed. With 36 light elements, square (6 x 6). Ra > 80. Color site tolerance (initial MacAdam)? 3 SDCM. Mean L80 (tq 25 ° C) = 100,000 h., mean L90 (tq 25 ° C) = 50,000 h. The light source is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Lamp made of sheet steel. White coated surface (similar to RAL 9016). Slip-off crates silver grey, with fine surface structure (RAL 7001). The drop-off boxes can be executed on request in other RAL colours. The colour of the dipped-off crates has no relevant influence on the light characteristics of the lamp. Protection class (EN 61140): II, protection type (DIN EN 60529): IP20, shock strength according to IEC 62262: IK03, test temperature filament wire test according to IEC 60695-2-11: 650 ° C. Permissible ambient temperature (ta): 25 ° C. Weight: 4.8 kg. High-speed padding with power transmission up to ± 2,5 mm2. Connection of the ballast to the lamp by plug and play. The packaging concept of the lamp allows separate removal of the operating equipment for pre-assembly, the other components of the lamp remain protected until final assembly. With external operating equipment, digital dimmable (DALI). Operating equipment according to DALI-2 standard (EN 62386). Lamp can be switched and dimmable via DALI control clamps (Touch DIM). The equipment is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Operating equipment is legible and protected from misconnection, short circuit, overload and overtemperature. Output ripple of the operating unit? 4% for effective control of the LED system and flicker-free light. The lamp is monitoring ready (MOR) and provides light data for monitoring or forward-looking maintenance. It is compatible with the TRILUX monitoring services. The product meets the essential requirements of the applicable EU Directives and the Product Safety Act and bears the CE marking. In addition, the lamp is certified by an independent test body ENEC. The lamp is part of a range of mounting, mounting and hanging lamps that are aligned in the appearance. Project-specific versions with varying luminaires are possible on request. Light 10 years, spare parts (LED module, operating equipment, optical system) available 15 years after the invoice date, subject to reasonable changes for progress.