Creavo M57-TS LWW-03 42-8TW ETDD8 01, fitted lights Creavo C HCL lens white ETDD8 50W 4200lm Wall-Wash (WW) IK03 3 SDCM

Appliances Creavo C HCL lens white ETDD8 50W 4200lm Wall-Wash (WW) IK03 3 SDCM

Rectangular LED ceiling inlay with light elements made of lens systems and cubic deflection elements and high efficiency. M57 (312.5 mm x 1250 mm). The use of the lamp is specifically intended for installation in system ceilings with visible support rails. Further information on the mounting of the lamp and its mounting can be taken from the assembly instructions. The optical system with a precise combination of LED lenses and dipped elements creates a very high visual comfort with very high lighting performance. Wallwasher with asymmetric light intensity distribution. Ejection angle 47 °. The optical system is specially designed for uniform table lighting. With Tunable White technology for controlling the light color by means of a separate control system (DT8). With 36 light elements, rectangular (2 x 18). Rated light current 4200 lm, rated power 49 W, maximum light output 86 lm / W light color Tunable White (hot white - day light white), similar colour temperature (CCT) Tunable White (2700 K - 6500 K), general colour reproduction index (CRI) Ra > 80. Color site tolerance (initial MacAdam)? 3 SDCM. Mean L80 (tq 25 ° C) = 100,000 h., mean L90 (tq 25 ° C) = 50,000 h. The light source is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Lamp made of sheet steel. White coated surface (similar to RAL 9016). Slip-off crates silver grey, with fine surface structure (RAL 7001). The drop-off boxes can be executed on request in other RAL colours. The colour of the dipped-off crates has no relevant influence on the light characteristics of the lamp. Protection class (EN 61140): I, protection type (DIN EN 60529): IP20, shock strength according to IEC 62262: IK03, test temperature filament wire test according to IEC 60695-2-11: 650 ° C. Permissible ambient temperature (ta): 25 ° C. Weight: 5.5 kg. High-speed padding with power transmission up to ± 2,5 mm2. Connection of the ballast to the lamp by plug and play. The packaging concept of the lamp allows separate removal of the operating equipment for pre-assembly, the other components of the lamp remain protected until final assembly. With electronic control unit for switching, dimming and controlling the light color using DALI Device Type 8 capable control unit. Operating equipment according to DALI-2 standard (EN 62386). The equipment is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Operating equipment is legible and protected from misconnection, short circuit, overload and overtemperature. Output ripple of the operating unit? 4% for effective control of the LED system and flicker-free light. The product meets the essential requirements of the applicable EU Directives and the Product Safety Act and bears the CE marking. The lamp is part of a range of mounting, mounting and hanging lamps that are aligned in the appearance. Project-specific versions with varying luminaires are possible on request. Light 10 years, spare parts (LED module, operating equipment, optical system) available 15 years after the invoice date, subject to reasonable changes for progress.