Publica P3-AB2L-SLR2 / 4200-740 4G1 ET, Mast lamps Publica P3 CLO (normal) Lense anthracite ET 37W 4200lm 70 asym. wide-radiant (AB2L) IP66 IK08 5 SDCM

Mast lamps Publica P3 CLO (normal) Lens anthracite ET 37W 4200lm 70 asym. wide-radiant (AB2L) IP66 IK08 5 SDCM

Decorative side support lamp with a flat cover. With intelligent label for quick call of light information using QR code. With connected, 6000 mm long supply line. With SLR (Smart Lighting Ready) equipment for the subsequent integration of components for light management systems. The standard base according to Zhaga are attached to the lamp head above and to the lower cover. The lamp is designed for the D4I standard and Zhaga / D4I certified. Mast-mounted lamp for mast-head Ø 76 mm, the mast-fitting is made of stainless steel with two fastening screws according to EN 60598-2-3. Using separately to order reduction pieces also suitable for mounting on masts with zopf Ø 60 mm. Matching mast on request. Optical system in multi-lens technology (MLT). Lamp optics consisting of high-efficiency, UV and temperature-resistant lens systems. With asymmetrical wide luminous intensity distribution. Optimized for horizontal alignment of the lamp body. Further radiation characteristics are available for flexible adaptation to customer-specific lighting tasks. The subsequent installation of a back / side shielding is possible as an accessory to be ordered separately. Light current and light colour fixed, with light current constant at the end of the life (CLO). With 4 LED modules. LED module consisting of four LEDs, including optical system. Measured light current 4200 lm, measuring power 35 W, maximum light output 120 lm / W light color neutral white, similar colour temperature (CCT) 4000 K, general colour rendering index (CRI) Ra > 70. Paint site tolerance (initial MacAdam)? 5 SDCM. Mean L80 (tq 25 ° C) = 100,000 h The light source is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Aluminium die-cast luminaire. Surface anthracite coated (similar to DB 703). Sea weather suitable coating on request. Disc of heat-treated single-disc safety glass (ESG-H). The lens is sealed in the lamp body. With a transmission rate of > 98%. Mast available on request. Protection class (EN 61140): II, protection type (DIN EN 60529): IP66, shock strength according to IEC 62262: IK08. Permissible ambient temperature (ta): 35 ° C Weight: 11.0 kg. Appliances with all electrical components and LED modules mounted as a top lamp. After dissolving four V2A fasteners can be removed. With operating equipment, switchable. The equipment is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Shock voltage resistance Differential mode / Common mode: 6 kV / 10 kV. The product meets the essential requirements of the applicable EU Directives and the Product Safety Act and bears the CE marking. In addition, the lamp is certified by an independent test body ENEC. Light 10 years, spare parts (LED module, operating equipment, optical system) available 15 years after the invoice date, subject to reasonable changes for progress.