SP FP FIX P 8W 930 PS DIM IP65 BK, installation beam for certain fire-retardant intermediate ceilings, fixed

For the purposes of this Regulation, the following definitions apply:

For the purposes of this Regulation, the following definitions shall apply: Product characteristics: Color rendering index Ra: 90. protection type: IP65 (room-side). Radiation angle: 36 °. Aluminium-cast housing. Fire protection source tape already pre-installed. Springs with soft silicone coating. Dimmbar (on many commercial dimmers, see also www.ledvance.de / dim). Wiring possible. Product advantages: Fire-retardant: Developed and tested for use in certain fire-retardant intermediate ceilings. Airtight design for reduced air leakage and reduced energy loss. Powerselect: Adjusting the brightness via dip switch on the driver. Easy exchange of the external driver thanks to plug with bayonet cap. Easy installation and electrical connection thanks to tool-free connection terminals. SCALE design - great appearance, high-quality materials and small size fit in any environment. 5 years warranty. Applications: Direct replacement for installation beams with halogen lamps. Fire-resistant ceilings. Hotel rooms and corridors. Bars, restaurants. Galleries, museums. Technical equipment: External ballast with dip switches for setting the performance during installation included. Selected DALI 2.0 driver is available as an accessory. Legal note: Installation instructions in the current instructions for use (www.ledvance.com) should be observed. Safety: coordination with the competent fire safety inspector is required before use. Fire protection requirement 30 min tested in fire-resistant intermediate ceiling RIGIPS SD12RF F30 according to EN-1364-2. Fire protection requirement 60 min tested in I-Joist cover system according to BS 476-21. All electrical connections may only be carried out by qualified personnel. Caution, danger of electric stroke. The lamps are not intended for the cover with heat-insulating material.