SFlow D3-L MRW LED4000-8TW ETDD8 LLWM 03, mounting lights Solvan Flow D HCL Raster silver ETDD8 37W 4000lm Lambertian (L) IK03 3 SDCM

Solvan Flow D HCL Raster Silver ETDD8 37W 4000lm Lambertian (L) IK03 3 SDCM

LED mounting lamp for single or light band applications. With integrated LiveLink WiFi control unit and LiveLink sensor for day-to-day control and presence recording as well as WLAN module for safe commissioning and operation (WPA2 encryption). Pre-defined room configurations (use cases) with all planning relevant data allow easy and fast commissioning. Control of up to 64 DALI participants. The commissioning is done with the help of the commissioning app LiveLink Install for tablet PCs. LiveLink sensor IR Micro for day-light control and presence recording. Constant light control with a shutdown function with sufficient daylight. Passive infrared presence sensor, with highly sensitive multisegment pyrosensors, with adjustable shutdown time, either in automatic operation (automatic on, automatic off) or semi-automatic operation (automatic off, manual on). Special IQ mode for automatic adaptation of the afterlife to space use. Electrical supply via the DALI interface of the control unit. Approved 2 DALI participants. Quadratic recording, recording squares presence max. 4 m x 4 m (16 m2) / Radial max. 4 m x 4 m (16 m2) / tangential max. 6 m x 6 m (36 m2) at a recommended mounting height of 2.8 m, allowed mounting height 2.5 m to 4 m. With separately ordered installation accessories also suitable for use in panel ceilings (SFlow ZBP L2). For panel ceilings in module 100. With accessories to be ordered separately also suitable for the suspended assembly (ZS1P 2000). Optical system in microreflector technology (MRW) with high-efficiency reflector chambers made of white-polished plastic for high light comfort and efficiency. With additional, integrated in the optical system, clear cover for space-wide-wide closure and protection of the LED. Decent lateral light decoupling over the entire length of the lamp. With lambertic light intensity distribution. With Tunable White technology for controlling the light color by means of a separate control system (DT8). Rated light current 4000 lm, rated power 37 W, maximum light output 108 lm / W light color Tunable White (hot white - day light white), similar colour temperature (CCT) Tunable White (2700 K - 6500 K), general colour rendering index (CRI) Ra > 80. Color site tolerance (initial MacAdam)? 3 SDCM. Mean L80 (tq 25 ° C) = 50,000 h. The light source is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Lamp made of sheet steel. Surface silver grey coated (similar to RAL 9006). Dimensions (L x B): 1473 mm x 84 mm, lamp height 57 mm. Protection class (EN 61140): I, protection type (DIN EN 60529): IP20, shock strength according to IEC 62262: IK03, test temperature filament wire test according to IEC 60695-2-11: 650 ° C. Permissible ambient temperature (ta): -20 ° C to 25 ° C. Weight: 4,5 kg. With electronic control unit for switching, dimming and controlling the light color using DALI Device Type 8 capable control unit. Operating equipment according to DALI-2 standard (EN 62386). The equipment is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). The product meets the essential requirements of the applicable EU Directives and the Product Safety Act and bears the CE marking. In addition, the lamp is certified by an independent test body ENEC. Light 10 years, spare parts (LED module, operating equipment, optical system) available 15 years after the invoice date, subject to reasonable changes for progress.