Creavo D2-L LW19-03 42-840 ETDD X3 01, mounting lamps Creavo D Lense white ETDD 29W 4200lm Wide reduced glare UGR19 (W19) IP40 IK03 3 SDCM

Creavo D lens white ETDD 29W 4200lm Wide reduced glare UGR19 (W19) IP40 IK03 3 SDCM

Rectangular LED ceiling lamp with light elements made of lens systems and cubic dipped elements with high efficiency. With integrated LiveLink WiFi control unit and LiveLink sensor for day-to-day control and presence recording as well as WLAN module for safe commissioning and operation (WPA2 encryption). Pre-defined room configurations (use cases) with all planning relevant data allow easy and fast commissioning. Control of up to 64 DALI participants. The commissioning is done with the help of the commissioning app LiveLink Install for tablet PCs. LiveLink sensor Tridonic Msensor G3 PIR 5DPI for day-to-day control and presence recording. Constant light control with a shutdown function with sufficient daylight. Passive infrared presence sensor, with highly sensitive multisegment pyrosensors, with adjustable shutdown time, either in automatic operation (automatic on, automatic off) or semi-automatic operation (automatic off, manual on). Special IQ mode for automatic adaptation of the after-life to space use Special IQ mode for automatic adaptation of the after-life to space use. Connection and electrical supply via the DALI interface of the LiveLink control unit. Number of DALI participants: 5. Coverage range: Ø 4.5 m, mounting height 2.5 m - 5 m. Mounting lamp for single or light tape applications. The optical system with a precise combination of LED lenses and dipped elements creates a very high visual comfort with very high lighting performance. With symmetrically limited wide luminous intensity distribution. Binding assessment according to UGRs classification (EN 12464-1) < 19. Screen-friendly according to EN 12464-1 by limited light density L? 3000 cd / m2 for radiating angles above 65 ° around. Light current and light color fixed. The LED system consists of 20 plan of cubic light elements inserted into the light surface. Measured light current 4200 lm, measuring power 29 W, maximum light output 145 lm / W light color neutral white, similar colour temperature (CCT) 4000 K, general colour rendering index (CRI) Ra > 80. Color site tolerance (initial MacAdam)? 3 SDCM. Mean L80 (tq 25 ° C) = 100,000 h., mean L90 (tq 25 ° C) = 50,000 h. The light source is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Lamp made of sheet steel. White coated surface (similar to RAL 9016). Blade crates silver grey, with fine surface structure. Dimensions (L x B): 1209 mm x 170 mm, lamp height 46 mm. Protection class (EN 61140): I, protection type (DIN EN 60529): IP40, shock strength according to IEC 62262: IK03, test temperature filament wire test according to IEC 60695-2-11: 650 ° C. Permissible ambient temperature (ta): 25 ° C Weight: 6,0 kg. With electronic operating equipment, digital dimmable (DALI). Operating equipment according to DALI-2 standard (EN 62386). Lamp can be switched and dimmable via DALI control clamps (Touch DIM). The equipment is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Operating equipment is legible and protected from misconnection, short circuit, overload and overtemperature. Output ripple of the operating unit? 4% for effective control of the LED system and flicker-free light. The lamp is monitoring ready (MOR) and provides light data for monitoring or forward-looking maintenance. It is compatible with the TRILUX monitoring services. The product meets the essential requirements of the applicable EU Directives and the Product Safety Act and bears the CE marking. The lamp is part of a range of mounting, mounting and hanging lamps that are aligned in the appearance. Project-specific versions with varying luminaires are possible on request. Light 10 years, spare parts (LED module, operating equipment, optical system) available 15 years after the invoice date, subject to reasonable changes for progress.