TugraHE 15 PW19 42-940 ET 01, humidity lights Tugra Prismen white ET 30W 4200lm 90 Wide reduced glare UGR19 (W19) IP66 IK03 3 SDCM

Moisture lamps Tugra Prismen white ET 30W 4200lm 90 Wide reduced glare UGR19 (W19) IP66 IK03 3 SDCM

Multivariable and modern tube lamp with 75 mm profile diameter. With limited surface temperature, suitable for use in fire-prone rooms according to DIN EN 60598-2-24. For wall and ceiling mounting. Standard stainless steel assembly clips (2 pieces, V2A) with triangle included. Optional accessories allow for further assembly concepts. As a single lamp or in light band application. The continuous assembly of the lamp body allows very high flexibility in the position of the mounting points. The packaging is made of recyclable cardboard, non-plastic. Multiple packaging with 28 lamps and project packaging with 108 lamps per packaging unit also reduce the general resource consumption in the overall process. Cylinder profile with a light-acting prism structure as secondary. With an open profile range above and translucent profile range below the assembly cones. With symmetrically limited wide luminous intensity distribution. With mainly direct light intensity distribution. With a slight indirect part for surface whitening. Binding assessment according to UGRs classification (EN 12464-1) < 19. Light current and light color fixed. Measured light current 4200 lm, measuring power 30 W, maximum light output 140 lm / W light color neutral white, similar colour temperature (CCT) 4000 K, general colour rendering index (CRI) Ra > 90. Color site tolerance (initial MacAdam)? 3 SDCM. The light source is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Light profile from PMMA. Colour of the end caps white (similar to RAL 9016). The end cap made of thermoplastic combined ASA / TPE with high-quality, matte surface structure and surface quality according to VDI30. For the protection-type feed-in (IP66), the end cap is equipped with 3 self-sealing membranes for line sections 7 mm - 13 mm and 3 pre-shaped feed-in points for PG screw-in (M20 / M25). The end cap is connected to the profile cylinder by bayonet. Standard end caps included. Lamp length 1568 mm, lamp height 75 mm, Ø lamp body 75 mm. The device carrier is fixed to the lamp profile with transparent devices to prevent shadow formation. Protection class (EN 61140): I, protection type (DIN EN 60529): IP66, shock strength according to IEC 62262: IK03, test temperature filament wire test according to IEC 60695-2-11: 650 ° C. Permissible ambient temperature (ta): -30 ° C to 35 ° C. Weight: 2,5 kg. The connection is made by means of a power supply terminal. The barrier-free cable channel within the light profiles facilitates the introduction of an optional passing wire or alternative use such as the installation of network lines. With electronic operating equipment, switchable. The equipment is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). The ENEC certification by an independent verifier is in preparation. The product meets the essential requirements of the applicable EU Directives and the Product Safety Act and bears the CE marking. In addition, the lamp is certified by an independent test body ENEC. Light 10 years, spare parts (LED module, operating equipment, optical system) available 15 years after the invoice date, subject to reasonable changes for progress.