ACQUEx LED-M 1.5 80-840 ETDD PC, Moisture Lights Acquex Diffuser ETDD 55W 8000lm Lambertian (L) IP66 IK10 3 SDCM

Moisture lamps Acquex Diffusor ETDD 55W 8000lm Lambertian (L) IP66 IK10 3 SDCM

Explosion-protected LED-Moisture-Canned Lamp. Suitable for wall and ceiling mounting, also for moisture dreams and covered outdoor areas. Suitable for use in areas which are rarely and only temporarily at risk of explosion by combustible dust clouds (zone 22). Suitable for use in areas that are rare in normal operation and are only at risk of explosion for a short time by gases, vapours or mist (zone 2). ATEX plate II 3G Ex ec IIC T6 Gc / II 3D Ex tc IIIC T85 ° C Dc / -20 ° C? Ta? + 50 ° C For horizontal or vertical ceiling and wall mounting. With accessories to be ordered separately also suitable for the suspended assembly. Lamp cover from a sprayed, transparent and UV-stabilized PC cover. With smooth surface and inside, prismatic cover for optimal light distribution. With lambertic light intensity distribution. The prismatic cover protects the LED system from unwanted contact during installation. Light current and light color fixed. Measured light current 8000 lm, measuring power 55 W, maximum light output 145 lm / W light color neutral white, similar colour temperature (CCT) 4000 K, general colour rendering index (CRI) Ra > 80. Color site tolerance (initial MacAdam)? 3 SDCM. Mean L80 (tq 25 ° C) = 70,000 h. Lamp body made of compressed, glass fibre-reinforced polyester. Surface of signal yellow coated (similar to RAL 1003). Dimensions (L x B): 1578 mm x 145 mm, lamp height 101 mm. Stainless steel tilt lever closure made of stainless and acid-resistant stainless steel (V2A). Seals made of polyurethane. Protection class (EN 61140): I, protection type (DIN EN 60529): IP66. Permissible ambient temperature (ta): -20 ° C to 50 ° C. Weight: 3,6 kg. The lamp is suitable for operation on a 230V DC. With operating equipment, digital dimmable (DALI). Operating equipment according to DALI-2 standard (EN 62386). Lamp can be switched and dimmable via DALI control clamps (Touch DIM). The lamp is monitoring ready (MOR) and provides light data for monitoring or forward-looking maintenance. It is compatible with the TRILUX monitoring services. The product meets the essential requirements of the applicable EU Directives and the Product Safety Act and bears the CE marking.