CS 19 S-MOD RE6R-LR / 3200-740 1G1 ET, headlight / radiator CS19 CLO (normal) reflector anthracite ET 23W 3200lm 70 rota.sym. light-emitting (RE) IP66 IK06 3 SDCM

Headlight / radiator CS19 CLO (normal) reflector anthracite ET 23W 3200lm 70 rota.sym. enclave (RE) IP66 IK06 3 SDCM

Radiator module of the modular, decorative light-point system CS19. With power reduction via control phase. The switch off of a control phase causes the light current to be set to 50%. For mounting on a compatible system stand tube. To be used as a single application with a standing tube or in combination with a standing tube, a lamp head and a radiator module. Compatible system standing tubes as a separate unit in different lengths as well as alternatively available with base or ground. With rotational symmetrical low-radiant light intensity distribution. Light current and light colour fixed, with light current constant at the end of the life (CLO). The chip-on-board LED system with reflector is swivel in 5 ° steps in a range of + / - 15 °. Measured light current 3200 lm, measuring power 21 W, maximum light output 152 lm / W light color neutral white, similar colour temperature (CCT) 4000 K, general colour rendering index (CRI) Ra > 70. Color site tolerance (initial MacAdam)? 3 SDCM. Mean L80 (tq 40 ° C) = 100,000 h. The light source is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). A smart box for the devices is installed in the steel steel steel module. With a clear, high-impact PMMA lens. Color anthracite (similar to DB 703). Sea weather suitable coating on request. Modular measure Ø 193,7 mm, h = 520 mm. Other colours and anti-graffiti coating on request. The module can be rotated in the stele by 360 °. The high design requirement of the stele is underlined by the cashew, invisible mounting elements of the segments. Protection class (EN 61140): II, protection type (DIN EN 60529): IP66, shock strength according to IEC 62262: IK06. Permissible ambient temperature (ta): -20 ° C to 40 ° C. With electronic operating equipment, switchable. The equipment is interchangeable according to the ecodesign requirements (VO (EU) 2019 / 2020). Shock voltage resistance Differential mode / Common mode: 6 kV / 10 kV. The product meets the essential requirements of the applicable EU Directives and the Product Safety Act and bears the CE marking. In addition, the lamp is certified by an independent test body ENEC. Light 10 years, spare parts (LED module, operating equipment, optical system) available 15 years after the invoice date, subject to reasonable changes for progress.